Antminer D7 vs Bitmain Antminer L3++ (580Mh)
Side-by-side specs, profitability, and home mining comparison.
Specifications Comparison
| Antminer D7 | Specification | Bitmain Antminer L3++ (580Mh) |
|---|---|---|
| 1,286.0 GH/s | Hashrate | 580.0 MH/s |
| 3,148 W | Power Consumption | 942 W |
| 2,447.9 J/TH | Efficiency | 1,624,137.9 J/TH |
| 70 dB | Noise Level | — |
| 14.4 kg | Weight | 4,400.0 kg |
| 10,741 BTU/hr | BTU Output | 3,214 BTU/hr |
| 36/100 | Home Mining Score | 31/100 |
| — | Release Year | — |
| X11 | Algorithm | Scrypt |
| Bitmain | Manufacturer | Bitmain |
Profitability Comparison
Antminer D7
Bitmain Antminer L3++ (580Mh)
Based on BTC price of $78,170 and current network difficulty as of May 16, 2026. Actual results vary.
Verdict
Weighing six performance factors, the Antminer D7 comes out ahead — it takes 5 of 6 (efficiency, hashrate, home mining score, noise level, price-performance). The standout gap is 221624% more hashrate (1.3 vs 0.0 TH/s) in the Antminer D7's favour. The Bitmain Antminer L3++ (580Mh) claws back ground on power consumption. The right pick still depends on your power cost and noise tolerance — the breakdowns above make that call concrete.
Spec Deltas
Here is every spec where the Antminer D7 and Bitmain Antminer L3++ (580Mh) actually differ, with the gap quantified:
- Antminer D7 221624% more hashrate (1.3 vs 0.0 TH/s)
- Bitmain Antminer L3++ (580Mh) 70% better power draw (3,148 vs 942 W)
- Antminer D7 100% better efficiency (2,448 vs 1,624,138 J/TH)
- Antminer D7 100% better weight (14.4 vs 4,400.0 kg)
- Antminer D7 234% more heat output (10,741 vs 3,214 BTU/hr)
- Antminer D7 16% more home mining score (36.0 vs 31.0)
Cost & ROI Over Time
Hardware cost is only half the story — here is how each miner's upfront price plays out against cumulative profit at a $0.10/kWh rate.
| Antminer D7 | Metric | Bitmain Antminer L3++ (580Mh) |
|---|---|---|
| $2,500 | Upfront cost (MSRP) | $1,190 |
| -$7.51 | Daily net profit | -$2.26 |
| -$5,241 | Net after 1 year | -$2,015 |
| -$7,982 | Net after 2 years | -$2,840 |
| -$10,722 | Net after 3 years | -$3,666 |
| Does not pay back at current rates (negative daily profit) | Payback period | Does not pay back at current rates (negative daily profit) |
Projections assume continuous operation, a flat $0.10/kWh rate, and no hardware degradation, pool fees, or BTC price change. Real-world ROI varies.
Best For...
Best for Profitability
TieBoth miners produce similar daily profit.
Best for Home Mining
Antminer D7Score: 36/100. 70 dB noise level.
Best for Efficiency
Antminer D72,447.9 J/TH — lower electricity cost per terahash.
Frequently Asked Questions
Antminer D7 vs Bitmain Antminer L3++ (580Mh): which one earns more per day?
At the current BTC price and a $0.10/kWh electricity rate, the Bitmain Antminer L3++ (580Mh) is more profitable at $-2.26/day compared to $-7.51/day for the Antminer D7. Profitability depends heavily on your electricity rate — use the selector above to calculate with your actual costs.
Antminer D7 vs Bitmain Antminer L3++ (580Mh): which runs at a lower noise level?
The Antminer D7 is quieter at 70 dB compared to the Bitmain Antminer L3++ (580Mh) at 0 dB. For home mining, lower noise levels make a significant difference in livability.
Which is better for home mining, the Antminer D7 or Bitmain Antminer L3++ (580Mh)?
The Antminer D7 scores 36/100 on our Home Mining Score (vs 31/100 for the Bitmain Antminer L3++ (580Mh)). This composite score factors in noise, power requirements, heat output, size, and setup ease — all critical for residential mining.
Antminer D7 vs Bitmain Antminer L3++ (580Mh): how much does the efficiency gap matter?
The Antminer D7 runs at 2,447.9 J/TH while the Bitmain Antminer L3++ (580Mh) runs at 1,624,137.9 J/TH — a difference of 1,621,690.0 J/TH. Lower efficiency means less electricity per terahash of mining power, directly reducing operating costs. In relative terms that is 100% better efficiency (2,448 vs 1,624,138 J/TH).