Antminer AL1 vs Bitmain Antminer S23 Hyd
Side-by-side specs, profitability, and home mining comparison.
Specifications Comparison
| Antminer AL1 | Specification | Bitmain Antminer S23 Hyd |
|---|---|---|
| 16.0 TH/s | Hashrate | 580.0 TH/s |
| 3,360 W | Power Consumption | 5,510 W |
| 210.0 J/TH | Efficiency | 9.5 J/TH |
| 75 dB | Noise Level | 75 dB |
| 14.5 kg | Weight | 13.5 kg |
| 11,464 BTU/hr | BTU Output | 18,800 BTU/hr |
| 36/100 | Home Mining Score | 30/100 |
| — | Release Year | — |
| Blake3 | Algorithm | SHA-256 |
| Bitmain | Manufacturer | Bitmain |
Profitability Comparison
Antminer AL1
Bitmain Antminer S23 Hyd
Based on BTC price of $79,090 and current network difficulty as of May 15, 2026. Actual results vary.
Verdict
Run the numbers across every spec and the Bitmain Antminer S23 Hyd edges it: 3 of 5 factors go its way (efficiency, hashrate, price-performance). The standout gap is 3525% more hashrate (16.0 vs 580.0 TH/s) in the Bitmain Antminer S23 Hyd's favour. The Antminer AL1 claws back ground on power consumption and home mining score. Review the detailed specs and profitability calculations above to determine which miner best fits your specific setup.
Spec Deltas
The Antminer AL1 and Bitmain Antminer S23 Hyd diverge on the metrics below — each gap expressed as a real percentage, not a vague "better":
- Bitmain Antminer S23 Hyd 3525% more hashrate (16.0 vs 580.0 TH/s)
- Antminer AL1 39% better power draw (3,360 vs 5,510 W)
- Bitmain Antminer S23 Hyd 95% better efficiency (210.0 vs 9.5 J/TH)
- Bitmain Antminer S23 Hyd 7% better weight (14.5 vs 13.5 kg)
- Bitmain Antminer S23 Hyd 64% more heat output (11,464 vs 18,800 BTU/hr)
- Antminer AL1 20% more home mining score (36.0 vs 30.0)
Cost & ROI Over Time
A miner pays for itself in profit, not specs. These projections track upfront cost against one, two and three years of net earnings at $0.10/kWh.
| Antminer AL1 | Metric | Bitmain Antminer S23 Hyd |
|---|---|---|
| $10,000 | Upfront cost (MSRP) | $12,995 |
| -$7.48 | Daily net profit | $7.89 |
| -$12,731 | Net after 1 year | -$10,117 |
| -$15,462 | Net after 2 years | -$7,239 |
| -$18,192 | Net after 3 years | -$4,360 |
| Does not pay back at current rates (negative daily profit) | Payback period | Takes ~4.5 years to pay back at current rates |
Projections assume continuous operation, a flat $0.10/kWh rate, and no hardware degradation, pool fees, or BTC price change. Real-world ROI varies.
Best For...
Best for Profitability
Bitmain Antminer S23 Hyd$15.37/day higher profit at current rates.
Best for Home Mining
Antminer AL1Score: 36/100. 75 dB noise level.
Best for Efficiency
Bitmain Antminer S23 Hyd9.5 J/TH — lower electricity cost per terahash.
Frequently Asked Questions
Antminer AL1 vs Bitmain Antminer S23 Hyd: which one earns more per day?
At the current BTC price and a $0.10/kWh electricity rate, the Bitmain Antminer S23 Hyd is more profitable at $7.89/day compared to $-7.48/day for the Antminer AL1. Profitability depends heavily on your electricity rate — use the selector above to calculate with your actual costs.
Is the Antminer AL1 or the Bitmain Antminer S23 Hyd better for noise-sensitive spaces?
Both miners have similar noise levels. Check the specs table above for exact decibel readings.
For mining at home, should I pick the Antminer AL1 or the Bitmain Antminer S23 Hyd?
The Antminer AL1 scores 36/100 on our Home Mining Score (vs 30/100 for the Bitmain Antminer S23 Hyd). This composite score factors in noise, power requirements, heat output, size, and setup ease — all critical for residential mining.
What is the efficiency difference between Antminer AL1 and Bitmain Antminer S23 Hyd?
The Antminer AL1 runs at 210.0 J/TH while the Bitmain Antminer S23 Hyd runs at 9.5 J/TH — a difference of 200.5 J/TH. Lower efficiency means less electricity per terahash of mining power, directly reducing operating costs. In relative terms that is 95% better efficiency (210.0 vs 9.5 J/TH).