Bitmain Antminer E3 (180Mh) vs Jasminer X4 BRICK
Side-by-side specs, profitability, and home mining comparison.
Specifications Comparison
| Bitmain Antminer E3 (180Mh) | Specification | Jasminer X4 BRICK |
|---|---|---|
| 180.0 MH/s | Hashrate | 65.0 MH/s |
| 800 W | Power Consumption | 30 W |
| 4,444,444.4 J/TH | Efficiency | 461,538.5 J/TH |
| — | Noise Level | — |
| 13,000.0 kg | Weight | 4,800.0 kg |
| 2,730 BTU/hr | BTU Output | 102 BTU/hr |
| 30/100 | Home Mining Score | 38/100 |
| — | Release Year | — |
| Etchash | Algorithm | Etchash |
| Bitmain | Manufacturer | Jasminer |
Profitability Comparison
Bitmain Antminer E3 (180Mh)
Jasminer X4 BRICK
Based on BTC price of $78,165 and current network difficulty as of May 16, 2026. Actual results vary.
Verdict
Our scoring model gives the nod to the Jasminer X4 BRICK, which leads on 3 of 3 weighted factors (efficiency, power consumption, home mining score). Its biggest concrete edge: 96% better power draw (800.0 vs 30.0 W). Review the detailed specs and profitability calculations above to determine which miner best fits your specific setup.
Spec Deltas
The Bitmain Antminer E3 (180Mh) and Jasminer X4 BRICK diverge on the metrics below — each gap expressed as a real percentage, not a vague "better":
- Bitmain Antminer E3 (180Mh) 177% more hashrate (0.0 vs 0.0 TH/s)
- Jasminer X4 BRICK 96% better power draw (800.0 vs 30.0 W)
- Jasminer X4 BRICK 90% better efficiency (4,444,444 vs 461,538 J/TH)
- Jasminer X4 BRICK 63% better weight (13,000 vs 4,800 kg)
- Bitmain Antminer E3 (180Mh) 2566% more heat output (2,730 vs 102 BTU/hr)
- Jasminer X4 BRICK 27% more home mining score (30.0 vs 38.0)
Cost & ROI Over Time
Hardware cost is only half the story — here is how each miner's upfront price plays out against cumulative profit at a $0.10/kWh rate.
| Bitmain Antminer E3 (180Mh) | Metric | Jasminer X4 BRICK |
|---|---|---|
| — | Upfront cost (MSRP) | $107 |
| -$1.92 | Daily net profit | -$0.07 |
| -$701 | Net after 1 year | -$133 |
| -$1,402 | Net after 2 years | -$159 |
| -$2,102 | Net after 3 years | -$186 |
| — | Payback period | Does not pay back at current rates (negative daily profit) |
Projections assume continuous operation, a flat $0.10/kWh rate, and no hardware degradation, pool fees, or BTC price change. Real-world ROI varies.
Best For...
Best for Profitability
TieBoth miners produce similar daily profit.
Best for Home Mining
Jasminer X4 BRICKScore: 38/100. 0 dB noise level.
Best for Efficiency
Jasminer X4 BRICK461,538.5 J/TH — lower electricity cost per terahash.
Frequently Asked Questions
Is the Bitmain Antminer E3 (180Mh) or Jasminer X4 BRICK more profitable?
At the current BTC price and a $0.10/kWh electricity rate, the Jasminer X4 BRICK is more profitable at $-0.07/day compared to $-1.92/day for the Bitmain Antminer E3 (180Mh). Profitability depends heavily on your electricity rate — use the selector above to calculate with your actual costs.
Is the Bitmain Antminer E3 (180Mh) or the Jasminer X4 BRICK better for noise-sensitive spaces?
Both miners have similar noise levels. Check the specs table above for exact decibel readings.
Which is better for home mining, the Bitmain Antminer E3 (180Mh) or Jasminer X4 BRICK?
The Jasminer X4 BRICK scores 38/100 on our Home Mining Score (vs 30/100 for the Bitmain Antminer E3 (180Mh)). This composite score factors in noise, power requirements, heat output, size, and setup ease — all critical for residential mining.
Bitmain Antminer E3 (180Mh) vs Jasminer X4 BRICK: how much does the efficiency gap matter?
The Bitmain Antminer E3 (180Mh) runs at 4,444,444.4 J/TH while the Jasminer X4 BRICK runs at 461,538.5 J/TH — a difference of 3,982,906.0 J/TH. Lower efficiency means less electricity per terahash of mining power, directly reducing operating costs. In relative terms that is 90% better efficiency (4,444,444 vs 461,538 J/TH).