Elphapex DG1 Lite vs FluMiner L3
Side-by-side specs, profitability, and home mining comparison.
Specifications Comparison
| Elphapex DG1 Lite | Specification | FluMiner L3 |
|---|---|---|
| 11.0 GH/s | Hashrate | 9.5 GH/s |
| 3,410 W | Power Consumption | 1,700 W |
| 310,000.0 J/TH | Efficiency | 178,947.4 J/TH |
| 75 dB | Noise Level | 50 dB |
| 18.3 kg | Weight | 12.8 kg |
| 11,635 BTU/hr | BTU Output | 5,800 BTU/hr |
| 36/100 | Home Mining Score | 56/100 |
| — | Release Year | — |
| Scrypt | Algorithm | Scrypt |
| Elphapex | Manufacturer | FluMiner |
Profitability Comparison
Elphapex DG1 Lite
FluMiner L3
Based on BTC price of $78,186 and current network difficulty as of May 16, 2026. Actual results vary.
Verdict
Our scoring model gives the nod to the FluMiner L3, which leads on 4 of 5 weighted factors (efficiency, power consumption, home mining score, noise level). Where it pulls away hardest is 50% better power draw (3,410 vs 1,700 W). The Elphapex DG1 Lite claws back ground on hashrate. Review the detailed specs and profitability calculations above to determine which miner best fits your specific setup.
Spec Deltas
The Elphapex DG1 Lite and FluMiner L3 diverge on the metrics below — each gap expressed as a real percentage, not a vague "better":
- Elphapex DG1 Lite 16% more hashrate (0.0 vs 0.0 TH/s)
- FluMiner L3 50% better power draw (3,410 vs 1,700 W)
- FluMiner L3 42% better efficiency (310,000 vs 178,947 J/TH)
- FluMiner L3 33% better noise (75.0 vs 50.0 dB)
- FluMiner L3 30% better weight (18.3 vs 12.8 kg)
- Elphapex DG1 Lite 101% more heat output (11,635 vs 5,800 BTU/hr)
- FluMiner L3 56% more home mining score (36.0 vs 56.0)
Cost & ROI Over Time
A miner pays for itself in profit, not specs. These projections track upfront cost against one, two and three years of net earnings at $0.10/kWh.
| Elphapex DG1 Lite | Metric | FluMiner L3 |
|---|---|---|
| — | Upfront cost (MSRP) | $2,849 |
| -$8.18 | Daily net profit | -$4.08 |
| -$2,987 | Net after 1 year | -$4,338 |
| -$5,974 | Net after 2 years | -$5,827 |
| -$8,961 | Net after 3 years | -$7,316 |
| — | Payback period | Does not pay back at current rates (negative daily profit) |
Projections assume continuous operation, a flat $0.10/kWh rate, and no hardware degradation, pool fees, or BTC price change. Real-world ROI varies.
Best For...
Best for Profitability
TieBoth miners produce similar daily profit.
Best for Home Mining
FluMiner L3Score: 56/100. 50 dB noise level.
Best for Efficiency
FluMiner L3178,947.4 J/TH — lower electricity cost per terahash.
Frequently Asked Questions
Is the Elphapex DG1 Lite or FluMiner L3 more profitable?
At the current BTC price and a $0.10/kWh electricity rate, the FluMiner L3 is more profitable at $-4.08/day compared to $-8.18/day for the Elphapex DG1 Lite. Profitability depends heavily on your electricity rate — use the selector above to calculate with your actual costs.
Which is quieter, the Elphapex DG1 Lite or FluMiner L3?
The FluMiner L3 is quieter at 50 dB compared to the Elphapex DG1 Lite at 75 dB. For home mining, lower noise levels make a significant difference in livability.
Which is better for home mining, the Elphapex DG1 Lite or FluMiner L3?
The FluMiner L3 scores 56/100 on our Home Mining Score (vs 36/100 for the Elphapex DG1 Lite). This composite score factors in noise, power requirements, heat output, size, and setup ease — all critical for residential mining.
How far apart are the Elphapex DG1 Lite and FluMiner L3 on J/TH?
The Elphapex DG1 Lite runs at 310,000.0 J/TH while the FluMiner L3 runs at 178,947.4 J/TH — a difference of 131,052.6 J/TH. Lower efficiency means less electricity per terahash of mining power, directly reducing operating costs. In relative terms that is 42% better efficiency (310,000 vs 178,947 J/TH).