Innosilicon A10 Pro ETH (500Mh)
Innosilicon A10 Pro ETH (500Mh) vs Innosilicon T3 39T
Side-by-side specs, profitability, and home mining comparison.
Specifications Comparison
| Innosilicon A10 Pro ETH (500Mh) | Specification | Innosilicon T3 39T |
|---|---|---|
| 500.0 MH/s | Taux de hachage | 39.0 TH/s |
| 960 W | Consommation électrique | 2,150 W |
| 1,920,000.0 J/TH | Efficiency | 55.1 J/TH |
| — | Niveau de bruit | — |
| 8,100.0 kg | Weight | 8,650.0 kg |
| 3,276 BTU/hr | BTU Output | 7,336 BTU/hr |
| 31/100 | Home Mining Score | 26/100 |
| — | Release Year | — |
| EtHash | Algorithme | SHA-256 |
| Innosilicon | Manufacturer | Innosilicon |
Profitability Comparison
Innosilicon A10 Pro ETH (500Mh)
Innosilicon T3 39T
Based on BTC price of $77,163 and current network difficulty as of May 25, 2026. Actual results vary.
Verdict
Run the numbers across every spec and the Innosilicon T3 39T edges it: 2 of 4 factors go its way (efficacité, hashrate). The standout gap is 7799900% more hashrate (0.0 vs 39.0 TH/s) in the Innosilicon T3 39T's favour. The Innosilicon A10 Pro ETH (500Mh) holds the edge in consommation électrique and score de minage domestique. Review the detailed specs and profitability calculations above to determine which miner best fits your specific setup.
Spec Deltas
Here is every spec where the Innosilicon A10 Pro ETH (500Mh) and Innosilicon T3 39T actually differ, with the gap quantified:
- Innosilicon T3 39T 7799900% more hashrate (0.0 vs 39.0 TH/s)
- Innosilicon A10 Pro ETH (500Mh) 55% better power draw (960 vs 2,150 W)
- Innosilicon T3 39T 100% better efficacité (1,920,000.0 vs 55.1 J/TH)
- Innosilicon A10 Pro ETH (500Mh) 6% better weight (8,100 vs 8,650 kg)
- Innosilicon T3 39T 124% more heat output (3,276 vs 7,336 BTU/hr)
- Innosilicon A10 Pro ETH (500Mh) 19% more score de minage domestique (31.0 vs 26.0)
Cost & ROI Over Time
Hardware cost is only half the story — here is how each miner's upfront price plays out against cumulative profit at a $0.10/kWh rate.
| Innosilicon A10 Pro ETH (500Mh) | Metric | Innosilicon T3 39T |
|---|---|---|
| $469 | Upfront cost (MSRP) | — |
| -$2.30 | Daily net profit | -$3.78 |
| -$1,310 | Net after 1 year | -$1,378 |
| -$2,151 | Net after 2 years | -$2,756 |
| -$2,992 | Net after 3 years | -$4,134 |
| Does not pay back at current rates (negative daily profit) | Payback period | — |
Projections assume continuous operation, a flat $0.10/kWh rate, and no hardware degradation, pool fees, or BTC price change. Real-world ROI varies.
Best For...
Best for Profitability
TieBoth miners produce similar daily profit.
Best for Home Mining
Innosilicon A10 Pro ETH (500Mh)Score: 31/100. 0 dB noise level.
Best for Efficiency
Innosilicon T3 39T55.1 J/TH — lower electricity cost per terahash.
Frequently Asked Questions
Which makes more money, the Innosilicon A10 Pro ETH (500Mh) or the Innosilicon T3 39T?
At the current BTC price and a $0.10/kWh electricity rate, the Innosilicon A10 Pro ETH (500Mh) is more profitable at $-2.30/day compared to $-3.78/day for the Innosilicon T3 39T. Profitability depends heavily on your electricity rate — use the selector above to calculate with your actual costs.
Innosilicon A10 Pro ETH (500Mh) vs Innosilicon T3 39T: which runs at a lower noise level?
Both miners have similar noise levels. Check the specs table above for exact decibel readings.
Innosilicon A10 Pro ETH (500Mh) vs Innosilicon T3 39T: which fits a residential setup better?
The Innosilicon A10 Pro ETH (500Mh) scores 31/100 on our Home Mining Score (vs 26/100 for the Innosilicon T3 39T). This composite score factors in noise, power requirements, heat output, size, and setup ease — all critical for residential mining.
How far apart are the Innosilicon A10 Pro ETH (500Mh) and Innosilicon T3 39T on J/TH?
The Innosilicon A10 Pro ETH (500Mh) runs at 1,920,000.0 J/TH while the Innosilicon T3 39T runs at 55.1 J/TH — a difference of 1,919,944.9 J/TH. Lower efficiency means less electricity per terahash of mining power, directly reducing operating costs. In relative terms that is 100% better efficacité (1,920,000.0 vs 55.1 J/TH).
Compare Innosilicon A10 Pro ETH (500Mh) with...
- Innosilicon A10 Pro ETH (500Mh) vs Innosilicon A10 ETHMaster (500Mh)
- Innosilicon A10 Pro ETH (500Mh) vs Innosilicon A10 Pro+ ETH (750Mh)
- Innosilicon A10 Pro ETH (500Mh) vs Innosilicon A11 Pro
- Innosilicon A10 Pro ETH (500Mh) vs Innosilicon A11 Pro ETH (1500Mh)
- Innosilicon A10 Pro ETH (500Mh) vs Innosilicon A4 Dominator
- Innosilicon A10 Pro ETH (500Mh) vs Innosilicon A4+ LTCMaster