Innosilicon A10 Pro+ ETH (750Mh) vs Innosilicon A5 DashMaster
Side-by-side specs, profitability, and home mining comparison.
Specifications Comparison
| Innosilicon A10 Pro+ ETH (750Mh) | Specification | Innosilicon A5 DashMaster |
|---|---|---|
| 750.0 MH/s | Hashrate | 32.5 GH/s |
| 1,350 W | Power Consumption | 750 W |
| 1,800,000.0 J/TH | Efficiency | 23,076.9 J/TH |
| — | Noise Level | — |
| 8,100.0 kg | Weight | 3,100.0 kg |
| 4,606 BTU/hr | BTU Output | 2,559 BTU/hr |
| 31/100 | Home Mining Score | 30/100 |
| — | Release Year | — |
| EtHash | Algorithm | X11 |
| Innosilicon | Manufacturer | Innosilicon |
Profitability Comparison
Innosilicon A10 Pro+ ETH (750Mh)
Innosilicon A5 DashMaster
Based on BTC price of $78,178 and current network difficulty as of May 16, 2026. Actual results vary.
Verdict
Based on our multi-factor analysis, the Innosilicon A5 DashMaster wins on 3 of 4 factors (efficiency, hashrate, power consumption). The standout gap is 99% better efficiency (1,800,000 vs 23,077 J/TH) in the Innosilicon A5 DashMaster's favour. The Innosilicon A10 Pro+ ETH (750Mh) holds the edge in home mining score. The right pick still depends on your power cost and noise tolerance — the breakdowns above make that call concrete.
Spec Deltas
The Innosilicon A10 Pro+ ETH (750Mh) and Innosilicon A5 DashMaster diverge on the metrics below — each gap expressed as a real percentage, not a vague "better":
- Innosilicon A5 DashMaster 4233% more hashrate (0.0 vs 0.0 TH/s)
- Innosilicon A5 DashMaster 44% better power draw (1,350 vs 750 W)
- Innosilicon A5 DashMaster 99% better efficiency (1,800,000 vs 23,077 J/TH)
- Innosilicon A5 DashMaster 62% better weight (8,100 vs 3,100 kg)
- Innosilicon A10 Pro+ ETH (750Mh) 80% more heat output (4,606 vs 2,559 BTU/hr)
- Innosilicon A10 Pro+ ETH (750Mh) 3% more home mining score (31.0 vs 30.0)
Cost & ROI Over Time
A miner pays for itself in profit, not specs. These projections track upfront cost against one, two and three years of net earnings at $0.10/kWh.
| Innosilicon A10 Pro+ ETH (750Mh) | Metric | Innosilicon A5 DashMaster |
|---|---|---|
| $800 | Upfront cost (MSRP) | — |
| -$3.24 | Daily net profit | -$1.80 |
| -$1,983 | Net after 1 year | -$657 |
| -$3,165 | Net after 2 years | -$1,313 |
| -$4,348 | Net after 3 years | -$1,970 |
| Does not pay back at current rates (negative daily profit) | Payback period | — |
Projections assume continuous operation, a flat $0.10/kWh rate, and no hardware degradation, pool fees, or BTC price change. Real-world ROI varies.
Best For...
Best for Profitability
TieBoth miners produce similar daily profit.
Best for Home Mining
Innosilicon A10 Pro+ ETH (750Mh)Score: 31/100. 0 dB noise level.
Best for Efficiency
Innosilicon A5 DashMaster23,076.9 J/TH — lower electricity cost per terahash.
Frequently Asked Questions
Is the Innosilicon A10 Pro+ ETH (750Mh) or Innosilicon A5 DashMaster more profitable?
At the current BTC price and a $0.10/kWh electricity rate, the Innosilicon A5 DashMaster is more profitable at $-1.80/day compared to $-3.24/day for the Innosilicon A10 Pro+ ETH (750Mh). Profitability depends heavily on your electricity rate — use the selector above to calculate with your actual costs.
Innosilicon A10 Pro+ ETH (750Mh) vs Innosilicon A5 DashMaster: which runs at a lower noise level?
Both miners have similar noise levels. Check the specs table above for exact decibel readings.
For mining at home, should I pick the Innosilicon A10 Pro+ ETH (750Mh) or the Innosilicon A5 DashMaster?
The Innosilicon A10 Pro+ ETH (750Mh) scores 31/100 on our Home Mining Score (vs 30/100 for the Innosilicon A5 DashMaster). This composite score factors in noise, power requirements, heat output, size, and setup ease — all critical for residential mining.
What is the efficiency difference between Innosilicon A10 Pro+ ETH (750Mh) and Innosilicon A5 DashMaster?
The Innosilicon A10 Pro+ ETH (750Mh) runs at 1,800,000.0 J/TH while the Innosilicon A5 DashMaster runs at 23,076.9 J/TH — a difference of 1,776,923.1 J/TH. Lower efficiency means less electricity per terahash of mining power, directly reducing operating costs. In relative terms that is 99% better efficiency (1,800,000 vs 23,077 J/TH).
Compare Innosilicon A10 Pro+ ETH (750Mh) with...
- Innosilicon A10 Pro+ ETH (750Mh) vs Innosilicon A10 ETHMaster (500Mh)
- Innosilicon A10 Pro+ ETH (750Mh) vs Innosilicon A10 Pro ETH (500Mh)
- Innosilicon A10 Pro+ ETH (750Mh) vs Innosilicon A11 Pro
- Innosilicon A10 Pro+ ETH (750Mh) vs Innosilicon A11 Pro ETH (1500Mh)
- Innosilicon A10 Pro+ ETH (750Mh) vs Innosilicon A4 Dominator
- Innosilicon A10 Pro+ ETH (750Mh) vs Innosilicon A4+ LTCMaster