Bitmain Antminer E3 (180Mh) vs iPollo V1 Classic
Side-by-side specs, profitability, and home mining comparison.
Specifications Comparison
| Bitmain Antminer E3 (180Mh) | Specification | iPollo V1 Classic |
|---|---|---|
| 180.0 MH/s | Hashrate | 1.6 GH/s |
| 800 W | Power Consumption | 1,240 W |
| 4,444,444.4 J/TH | Efficiency | 800,000.0 J/TH |
| — | Noise Level | — |
| 13,000.0 kg | Weight | 13,000.0 kg |
| 2,730 BTU/hr | BTU Output | 4,231 BTU/hr |
| 30/100 | Home Mining Score | 31/100 |
| — | Release Year | — |
| Etchash | Algorithm | Etchash |
| Bitmain | Manufacturer | iPollo |
Profitability Comparison
Bitmain Antminer E3 (180Mh)
iPollo V1 Classic
Based on BTC price of $78,165 and current network difficulty as of May 16, 2026. Actual results vary.
Verdict
Our scoring model gives the nod to the iPollo V1 Classic, which leads on 3 of 4 weighted factors (efficiency, hashrate, home mining score). Where it pulls away hardest is 761% more hashrate (0.0 vs 0.0 TH/s). The Bitmain Antminer E3 (180Mh) claws back ground on power consumption. Cross-check the spec deltas and ROI table above against your own electricity rate before deciding.
Spec Deltas
The Bitmain Antminer E3 (180Mh) and iPollo V1 Classic diverge on the metrics below — each gap expressed as a real percentage, not a vague "better":
- iPollo V1 Classic 761% more hashrate (0.0 vs 0.0 TH/s)
- Bitmain Antminer E3 (180Mh) 35% better power draw (800 vs 1,240 W)
- iPollo V1 Classic 82% better efficiency (4,444,444 vs 800,000 J/TH)
- iPollo V1 Classic 55% more heat output (2,730 vs 4,231 BTU/hr)
- iPollo V1 Classic 3% more home mining score (30.0 vs 31.0)
Cost & ROI Over Time
Sticker price versus what the miner actually earns back: the table below projects cumulative net profit at a $0.10/kWh electricity rate.
| Bitmain Antminer E3 (180Mh) | Metric | iPollo V1 Classic |
|---|---|---|
| — | Upfront cost (MSRP) | $369 |
| -$1.92 | Daily net profit | -$2.98 |
| -$701 | Net after 1 year | -$1,455 |
| -$1,402 | Net after 2 years | -$2,541 |
| -$2,102 | Net after 3 years | -$3,628 |
| — | Payback period | Does not pay back at current rates (negative daily profit) |
Projections assume continuous operation, a flat $0.10/kWh rate, and no hardware degradation, pool fees, or BTC price change. Real-world ROI varies.
Best For...
Best for Profitability
TieBoth miners produce similar daily profit.
Best for Home Mining
iPollo V1 ClassicScore: 31/100. 0 dB noise level.
Best for Efficiency
iPollo V1 Classic800,000.0 J/TH — lower electricity cost per terahash.
Frequently Asked Questions
Bitmain Antminer E3 (180Mh) vs iPollo V1 Classic: which one earns more per day?
At the current BTC price and a $0.10/kWh electricity rate, the Bitmain Antminer E3 (180Mh) is more profitable at $-1.92/day compared to $-2.98/day for the iPollo V1 Classic. Profitability depends heavily on your electricity rate — use the selector above to calculate with your actual costs.
Which is quieter, the Bitmain Antminer E3 (180Mh) or iPollo V1 Classic?
Both miners have similar noise levels. Check the specs table above for exact decibel readings.
For mining at home, should I pick the Bitmain Antminer E3 (180Mh) or the iPollo V1 Classic?
The iPollo V1 Classic scores 31/100 on our Home Mining Score (vs 30/100 for the Bitmain Antminer E3 (180Mh)). This composite score factors in noise, power requirements, heat output, size, and setup ease — all critical for residential mining.
Bitmain Antminer E3 (180Mh) vs iPollo V1 Classic: how much does the efficiency gap matter?
The Bitmain Antminer E3 (180Mh) runs at 4,444,444.4 J/TH while the iPollo V1 Classic runs at 800,000.0 J/TH — a difference of 3,644,444.4 J/TH. Lower efficiency means less electricity per terahash of mining power, directly reducing operating costs. In relative terms that is 82% better efficiency (4,444,444 vs 800,000 J/TH).