Bitmain Antminer L7 (9.16Gh) vs VOLCMINER D1
Side-by-side specs, profitability, and home mining comparison.
Specifications Comparison
| Bitmain Antminer L7 (9.16Gh) | Specification | VOLCMINER D1 |
|---|---|---|
| 9.2 GH/s | Hashrate | 17.0 GH/s |
| 3,425 W | Power Consumption | 3,900 W |
| 373,908.3 J/TH | Efficiency | 229,411.8 J/TH |
| — | Noise Level | 75 dB |
| 15,000.0 kg | Weight | — |
| 11,686 BTU/hr | BTU Output | 13,307 BTU/hr |
| 22/100 | Home Mining Score | 30/100 |
| — | Release Year | — |
| Scrypt | Algorithm | Scrypt |
| Bitmain | Manufacturer | VOLCMINER |
Profitability Comparison
Bitmain Antminer L7 (9.16Gh)
VOLCMINER D1
Based on BTC price of $78,165 and current network difficulty as of May 16, 2026. Actual results vary.
Verdict
Run the numbers across every spec and the VOLCMINER D1 edges it: 4 of 6 factors go its way (efficiency, hashrate, home mining score, noise level). The standout gap is 86% more hashrate (0.0 vs 0.0 TH/s) in the VOLCMINER D1's favour. The Bitmain Antminer L7 (9.16Gh) claws back ground on power consumption and price-performance. Cross-check the spec deltas and ROI table above against your own electricity rate before deciding.
Spec Deltas
The Bitmain Antminer L7 (9.16Gh) and VOLCMINER D1 diverge on the metrics below — each gap expressed as a real percentage, not a vague "better":
- VOLCMINER D1 86% more hashrate (0.0 vs 0.0 TH/s)
- Bitmain Antminer L7 (9.16Gh) 12% better power draw (3,425 vs 3,900 W)
- VOLCMINER D1 39% better efficiency (373,908 vs 229,412 J/TH)
- VOLCMINER D1 14% more heat output (11,686 vs 13,307 BTU/hr)
- VOLCMINER D1 36% more home mining score (22.0 vs 30.0)
Cost & ROI Over Time
A miner pays for itself in profit, not specs. These projections track upfront cost against one, two and three years of net earnings at $0.10/kWh.
| Bitmain Antminer L7 (9.16Gh) | Metric | VOLCMINER D1 |
|---|---|---|
| $1,599 | Upfront cost (MSRP) | $3,465 |
| -$8.22 | Daily net profit | -$9.36 |
| -$4,599 | Net after 1 year | -$6,881 |
| -$7,599 | Net after 2 years | -$10,297 |
| -$10,600 | Net after 3 years | -$13,714 |
| Does not pay back at current rates (negative daily profit) | Payback period | Does not pay back at current rates (negative daily profit) |
Projections assume continuous operation, a flat $0.10/kWh rate, and no hardware degradation, pool fees, or BTC price change. Real-world ROI varies.
Best For...
Best for Profitability
TieBoth miners produce similar daily profit.
Best for Home Mining
VOLCMINER D1Score: 30/100. 75 dB noise level.
Best for Efficiency
VOLCMINER D1229,411.8 J/TH — lower electricity cost per terahash.
Frequently Asked Questions
Which makes more money, the Bitmain Antminer L7 (9.16Gh) or the VOLCMINER D1?
At the current BTC price and a $0.10/kWh electricity rate, the Bitmain Antminer L7 (9.16Gh) is more profitable at $-8.22/day compared to $-9.36/day for the VOLCMINER D1. Profitability depends heavily on your electricity rate — use the selector above to calculate with your actual costs.
Is the Bitmain Antminer L7 (9.16Gh) or the VOLCMINER D1 better for noise-sensitive spaces?
The VOLCMINER D1 is quieter at 75 dB compared to the Bitmain Antminer L7 (9.16Gh) at 0 dB. For home mining, lower noise levels make a significant difference in livability.
Which is better for home mining, the Bitmain Antminer L7 (9.16Gh) or VOLCMINER D1?
The VOLCMINER D1 scores 30/100 on our Home Mining Score (vs 22/100 for the Bitmain Antminer L7 (9.16Gh)). This composite score factors in noise, power requirements, heat output, size, and setup ease — all critical for residential mining.
Bitmain Antminer L7 (9.16Gh) vs VOLCMINER D1: how much does the efficiency gap matter?
The Bitmain Antminer L7 (9.16Gh) runs at 373,908.3 J/TH while the VOLCMINER D1 runs at 229,411.8 J/TH — a difference of 144,496.5 J/TH. Lower efficiency means less electricity per terahash of mining power, directly reducing operating costs. In relative terms that is 39% better efficiency (373,908 vs 229,412 J/TH).