iBeLink BM-N3 vs iBeLink BM-S1 Max
Side-by-side specs, profitability, and home mining comparison.
Specifications Comparison
| iBeLink BM-N3 | Specification | iBeLink BM-S1 Max |
|---|---|---|
| 25.0 TH/s | Hashrate | 12.0 TH/s |
| 3,300 W | Power Consumption | 3,150 W |
| 132.0 J/TH | Efficiency | 262.5 J/TH |
| — | Noise Level | — |
| — | Weight | 9,000.0 kg |
| 11,260 BTU/hr | BTU Output | 10,748 BTU/hr |
| 22/100 | Home Mining Score | 22/100 |
| — | Release Year | — |
| Eaglesong | Algorithm | Blake2b-sia |
| iBeLink | Manufacturer | iBeLink |
Profitability Comparison
iBeLink BM-N3
iBeLink BM-S1 Max
Based on BTC price of $76,908 and current network difficulty as of May 18, 2026. Actual results vary.
Verdict
Run the numbers across every spec and the iBeLink BM-N3 edges it: 3 of 4 factors go its way (efficiency, hashrate, price-performance). Its biggest concrete edge: 108% more hashrate (25.0 vs 12.0 TH/s). That said, the iBeLink BM-S1 Max isn't beaten everywhere — it still wins power consumption. Review the detailed specs and profitability calculations above to determine which miner best fits your specific setup.
Spec Deltas
Stripped to the numbers, this is how far apart the iBeLink BM-N3 and iBeLink BM-S1 Max sit on each measurable spec:
- iBeLink BM-N3 108% more hashrate (25.0 vs 12.0 TH/s)
- iBeLink BM-S1 Max 5% better power draw (3,300 vs 3,150 W)
- iBeLink BM-N3 50% better efficiency (132 vs 263 J/TH)
- iBeLink BM-N3 5% more heat output (11,260 vs 10,748 BTU/hr)
Cost & ROI Over Time
Hardware cost is only half the story — here is how each miner's upfront price plays out against cumulative profit at a $0.10/kWh rate.
| iBeLink BM-N3 | Metric | iBeLink BM-S1 Max |
|---|---|---|
| $980 | Upfront cost (MSRP) | $899 |
| -$7.04 | Daily net profit | -$7.14 |
| -$3,548 | Net after 1 year | -$3,503 |
| -$6,116 | Net after 2 years | -$6,108 |
| -$8,684 | Net after 3 years | -$8,712 |
| Does not pay back at current rates (negative daily profit) | Payback period | Does not pay back at current rates (negative daily profit) |
Projections assume continuous operation, a flat $0.10/kWh rate, and no hardware degradation, pool fees, or BTC price change. Real-world ROI varies.
Best For...
Best for Profitability
TieBoth miners produce similar daily profit.
Best for Home Mining
TieBoth miners are equally suitable for home use.
Best for Efficiency
iBeLink BM-N3132.0 J/TH — lower electricity cost per terahash.
Frequently Asked Questions
Is the iBeLink BM-N3 or iBeLink BM-S1 Max more profitable?
At the current BTC price and a $0.10/kWh electricity rate, the iBeLink BM-N3 is more profitable at $-7.04/day compared to $-7.14/day for the iBeLink BM-S1 Max. Profitability depends heavily on your electricity rate — use the selector above to calculate with your actual costs.
Which is quieter, the iBeLink BM-N3 or iBeLink BM-S1 Max?
Both miners have similar noise levels. Check the specs table above for exact decibel readings.
Which is better for home mining, the iBeLink BM-N3 or iBeLink BM-S1 Max?
Both miners score similarly on our Home Mining Score. Consider your specific constraints (noise tolerance, available power, heat needs) to decide.
What is the efficiency difference between iBeLink BM-N3 and iBeLink BM-S1 Max?
The iBeLink BM-N3 runs at 132.0 J/TH while the iBeLink BM-S1 Max runs at 262.5 J/TH — a difference of 130.5 J/TH. Lower efficiency means less electricity per terahash of mining power, directly reducing operating costs. In relative terms that is 50% better efficiency (132 vs 263 J/TH).