Elphapex DG 1+ vs FluMiner L3
Side-by-side specs, profitability, and home mining comparison.
Specifications Comparison
| Elphapex DG 1+ | Specification | FluMiner L3 |
|---|---|---|
| 14.0 GH/s | Hashrate | 9.5 GH/s |
| 3,920 W | Power Consumption | 1,700 W |
| 280,000.0 J/TH | Efficiency | 178,947.4 J/TH |
| 75 dB | Noise Level | 50 dB |
| 18.3 kg | Weight | 12.8 kg |
| 13,375 BTU/hr | BTU Output | 5,800 BTU/hr |
| 30/100 | Home Mining Score | 56/100 |
| — | Release Year | — |
| Scrypt | Algorithm | Scrypt |
| Elphapex | Manufacturer | FluMiner |
Profitability Comparison
Elphapex DG 1+
FluMiner L3
Based on BTC price of $78,186 and current network difficulty as of May 16, 2026. Actual results vary.
Verdict
Run the numbers across every spec and the FluMiner L3 edges it: 4 of 6 factors go its way (efficiency, power consumption, home mining score, noise level). Where it pulls away hardest is 57% better power draw (3,920 vs 1,700 W). That said, the Elphapex DG 1+ isn't beaten everywhere — it still wins hashrate and price-performance. Cross-check the spec deltas and ROI table above against your own electricity rate before deciding.
Spec Deltas
Stripped to the numbers, this is how far apart the Elphapex DG 1+ and FluMiner L3 sit on each measurable spec:
- Elphapex DG 1+ 47% more hashrate (0.0 vs 0.0 TH/s)
- FluMiner L3 57% better power draw (3,920 vs 1,700 W)
- FluMiner L3 36% better efficiency (280,000 vs 178,947 J/TH)
- FluMiner L3 33% better noise (75.0 vs 50.0 dB)
- FluMiner L3 30% better weight (18.3 vs 12.8 kg)
- Elphapex DG 1+ 131% more heat output (13,375 vs 5,800 BTU/hr)
- FluMiner L3 87% more home mining score (30.0 vs 56.0)
Cost & ROI Over Time
A miner pays for itself in profit, not specs. These projections track upfront cost against one, two and three years of net earnings at $0.10/kWh.
| Elphapex DG 1+ | Metric | FluMiner L3 |
|---|---|---|
| $1,452 | Upfront cost (MSRP) | $2,849 |
| -$9.41 | Daily net profit | -$4.08 |
| -$4,885 | Net after 1 year | -$4,338 |
| -$8,319 | Net after 2 years | -$5,827 |
| -$11,753 | Net after 3 years | -$7,316 |
| Does not pay back at current rates (negative daily profit) | Payback period | Does not pay back at current rates (negative daily profit) |
Projections assume continuous operation, a flat $0.10/kWh rate, and no hardware degradation, pool fees, or BTC price change. Real-world ROI varies.
Best For...
Best for Profitability
TieBoth miners produce similar daily profit.
Best for Home Mining
FluMiner L3Score: 56/100. 50 dB noise level.
Best for Efficiency
FluMiner L3178,947.4 J/TH — lower electricity cost per terahash.
Frequently Asked Questions
Which makes more money, the Elphapex DG 1+ or the FluMiner L3?
At the current BTC price and a $0.10/kWh electricity rate, the FluMiner L3 is more profitable at $-4.08/day compared to $-9.41/day for the Elphapex DG 1+. Profitability depends heavily on your electricity rate — use the selector above to calculate with your actual costs.
Which is quieter, the Elphapex DG 1+ or FluMiner L3?
The FluMiner L3 is quieter at 50 dB compared to the Elphapex DG 1+ at 75 dB. For home mining, lower noise levels make a significant difference in livability.
Which is better for home mining, the Elphapex DG 1+ or FluMiner L3?
The FluMiner L3 scores 56/100 on our Home Mining Score (vs 30/100 for the Elphapex DG 1+). This composite score factors in noise, power requirements, heat output, size, and setup ease — all critical for residential mining.
How far apart are the Elphapex DG 1+ and FluMiner L3 on J/TH?
The Elphapex DG 1+ runs at 280,000.0 J/TH while the FluMiner L3 runs at 178,947.4 J/TH — a difference of 101,052.6 J/TH. Lower efficiency means less electricity per terahash of mining power, directly reducing operating costs. In relative terms that is 36% better efficiency (280,000 vs 178,947 J/TH).