Innosilicon A10 ETHMaster (500Mh)
Innosilicon A10 ETHMaster (500Mh) vs Innosilicon T2 Terminator
Side-by-side specs, profitability, and home mining comparison.
Specifications Comparison
| Innosilicon A10 ETHMaster (500Mh) | Specification | Innosilicon T2 Terminator |
|---|---|---|
| 500.0 MH/s | Taux de hachage | 17.2 TH/s |
| 750 W | Consommation électrique | 1,570 W |
| 1,500,000.0 J/TH | Efficiency | 91.3 J/TH |
| — | Niveau de bruit | — |
| 8.1 kg | Weight | 7.5 kg |
| 2,559 BTU/hr | BTU Output | 5,357 BTU/hr |
| 30/100 | Home Mining Score | 28/100 |
| — | Release Year | — |
| Etchash | Algorithme | SHA-256 |
| Innosilicon | Manufacturer | Innosilicon |
Profitability Comparison
Innosilicon A10 ETHMaster (500Mh)
Innosilicon T2 Terminator
Based on BTC price of $64,314 and current network difficulty as of Jun 4, 2026. Actual results vary.
Verdict
Our scoring model gives the nod to the Innosilicon T2 Terminator, which leads on 3 of 5 weighted factors (efficacité, hashrate, rapport qualité-prix). The standout gap is 3439900% more hashrate (0.0 vs 17.2 TH/s) in the Innosilicon T2 Terminator's favour. The Innosilicon A10 ETHMaster (500Mh) holds the edge in consommation électrique and score de minage domestique. Cross-check the spec deltas and operating-cost table above against your own electricity rate before deciding.
Spec Deltas
Stripped to the numbers, this is how far apart the Innosilicon A10 ETHMaster (500Mh) and Innosilicon T2 Terminator sit on each measurable spec:
- Innosilicon T2 Terminator 3439900% more hashrate (0.0 vs 17.2 TH/s)
- Innosilicon A10 ETHMaster (500Mh) 52% better power draw (750 vs 1,570 W)
- Innosilicon T2 Terminator 100% better efficacité (1,500,000.0 vs 91.3 J/TH)
- Innosilicon T2 Terminator 7% better weight (8.1 vs 7.5 kg)
- Innosilicon T2 Terminator 109% more heat output (2,559 vs 5,357 BTU/hr)
- Innosilicon A10 ETHMaster (500Mh) 7% more score de minage domestique (30.0 vs 28.0)
Cost & ROI Over Time
Hardware cost is only half the story — here is how each miner's upfront price plays out against cumulative profit at a $0.10/kWh rate.
| Innosilicon A10 ETHMaster (500Mh) | Metric | Innosilicon T2 Terminator |
|---|---|---|
| $2,150 | Upfront cost (MSRP) | $850 |
| -$1.80 | Daily net profit | -$3.27 |
| -$2,807 | Net after 1 year | -$2,043 |
| -$3,464 | Net after 2 years | -$3,235 |
| -$4,121 | Net after 3 years | -$4,428 |
| Does not pay back at current rates (negative daily profit) | Payback period | Does not pay back at current rates (negative daily profit) |
Projections assume continuous operation, a flat $0.10/kWh rate, and no hardware degradation, pool fees, or BTC price change. Real-world ROI varies.
Best For...
Best for Profitability
TieBoth miners produce similar daily profit.
Best for Home Mining
Innosilicon A10 ETHMaster (500Mh)Score: 30/100. 0 dB noise level.
Best for Efficiency
Innosilicon T2 Terminator91.3 J/TH — lower electricity cost per terahash.
Frequently Asked Questions
Innosilicon A10 ETHMaster (500Mh) vs Innosilicon T2 Terminator: which one earns more per day?
At the current BTC price and a $0.10/kWh electricity rate, the Innosilicon A10 ETHMaster (500Mh) is more profitable at $-1.80/day compared to $-3.27/day for the Innosilicon T2 Terminator. Profitability depends heavily on your electricity rate — use the selector above to calculate with your actual costs.
Which is quieter, the Innosilicon A10 ETHMaster (500Mh) or Innosilicon T2 Terminator?
Both miners have similar noise levels. Check the specs table above for exact decibel readings.
For mining at home, should I pick the Innosilicon A10 ETHMaster (500Mh) or the Innosilicon T2 Terminator?
The Innosilicon A10 ETHMaster (500Mh) scores 30/100 on our Home Mining Score (vs 28/100 for the Innosilicon T2 Terminator). This composite score factors in noise, power requirements, heat output, size, and setup ease — all critical for residential mining.
How far apart are the Innosilicon A10 ETHMaster (500Mh) and Innosilicon T2 Terminator on J/TH?
The Innosilicon A10 ETHMaster (500Mh) runs at 1,500,000.0 J/TH while the Innosilicon T2 Terminator runs at 91.3 J/TH — a difference of 1,499,908.7 J/TH. Lower efficiency means less electricity per terahash of mining power, directly reducing operating costs. In relative terms that is 100% better efficacité (1,500,000.0 vs 91.3 J/TH).
Compare Innosilicon A10 ETHMaster (500Mh) with...
- Innosilicon A10 ETHMaster (500Mh) vs Innosilicon A10 Pro ETH (500Mh)
- Innosilicon A10 ETHMaster (500Mh) vs Innosilicon A10 Pro+ ETH (750Mh)
- Innosilicon A10 ETHMaster (500Mh) vs Innosilicon A11 Pro
- Innosilicon A10 ETHMaster (500Mh) vs Innosilicon A11 Pro ETH (1500Mh)
- Innosilicon A10 ETHMaster (500Mh) vs Innosilicon A4 Dominator
- Innosilicon A10 ETHMaster (500Mh) vs Innosilicon A4+ LTCMaster