Innosilicon A10 Pro+ ETH (750Mh) vs Innosilicon A6 LTCMaster
Side-by-side specs, profitability, and home mining comparison.
Specifications Comparison
| Innosilicon A10 Pro+ ETH (750Mh) | Specification | Innosilicon A6 LTCMaster |
|---|---|---|
| 750.0 MH/s | Hashrate | 1.2 GH/s |
| 1,350 W | Power Consumption | 1,500 W |
| 1,800,000.0 J/TH | Efficiency | 1,219,512.2 J/TH |
| — | Noise Level | — |
| 8,100.0 kg | Weight | 7,550.0 kg |
| 4,606 BTU/hr | BTU Output | 5,118 BTU/hr |
| 31/100 | Home Mining Score | 34/100 |
| — | Release Year | — |
| EtHash | Algorithm | Scrypt |
| Innosilicon | Manufacturer | Innosilicon |
Profitability Comparison
Innosilicon A10 Pro+ ETH (750Mh)
Innosilicon A6 LTCMaster
Based on BTC price of $78,165 and current network difficulty as of May 16, 2026. Actual results vary.
Verdict
Based on our multi-factor analysis, the Innosilicon A6 LTCMaster wins on 3 of 4 factors (efficiency, home mining score, price-performance). Where it pulls away hardest is 64% more hashrate (0.0 vs 0.0 TH/s). That said, the Innosilicon A10 Pro+ ETH (750Mh) isn't beaten everywhere — it still wins power consumption. Review the detailed specs and profitability calculations above to determine which miner best fits your specific setup.
Spec Deltas
Here is every spec where the Innosilicon A10 Pro+ ETH (750Mh) and Innosilicon A6 LTCMaster actually differ, with the gap quantified:
- Innosilicon A6 LTCMaster 64% more hashrate (0.0 vs 0.0 TH/s)
- Innosilicon A10 Pro+ ETH (750Mh) 10% better power draw (1,350 vs 1,500 W)
- Innosilicon A6 LTCMaster 32% better efficiency (1,800,000 vs 1,219,512 J/TH)
- Innosilicon A6 LTCMaster 7% better weight (8,100 vs 7,550 kg)
- Innosilicon A6 LTCMaster 11% more heat output (4,606 vs 5,118 BTU/hr)
- Innosilicon A6 LTCMaster 10% more home mining score (31.0 vs 34.0)
Cost & ROI Over Time
Hardware cost is only half the story — here is how each miner's upfront price plays out against cumulative profit at a $0.10/kWh rate.
| Innosilicon A10 Pro+ ETH (750Mh) | Metric | Innosilicon A6 LTCMaster |
|---|---|---|
| $800 | Upfront cost (MSRP) | $1,299 |
| -$3.24 | Daily net profit | -$3.60 |
| -$1,983 | Net after 1 year | -$2,613 |
| -$3,165 | Net after 2 years | -$3,927 |
| -$4,348 | Net after 3 years | -$5,241 |
| Does not pay back at current rates (negative daily profit) | Payback period | Does not pay back at current rates (negative daily profit) |
Projections assume continuous operation, a flat $0.10/kWh rate, and no hardware degradation, pool fees, or BTC price change. Real-world ROI varies.
Best For...
Best for Profitability
TieBoth miners produce similar daily profit.
Best for Home Mining
Innosilicon A6 LTCMasterScore: 34/100. 0 dB noise level.
Best for Efficiency
Innosilicon A6 LTCMaster1,219,512.2 J/TH — lower electricity cost per terahash.
Frequently Asked Questions
Is the Innosilicon A10 Pro+ ETH (750Mh) or Innosilicon A6 LTCMaster more profitable?
At the current BTC price and a $0.10/kWh electricity rate, the Innosilicon A10 Pro+ ETH (750Mh) is more profitable at $-3.24/day compared to $-3.60/day for the Innosilicon A6 LTCMaster. Profitability depends heavily on your electricity rate — use the selector above to calculate with your actual costs.
Is the Innosilicon A10 Pro+ ETH (750Mh) or the Innosilicon A6 LTCMaster better for noise-sensitive spaces?
Both miners have similar noise levels. Check the specs table above for exact decibel readings.
For mining at home, should I pick the Innosilicon A10 Pro+ ETH (750Mh) or the Innosilicon A6 LTCMaster?
The Innosilicon A6 LTCMaster scores 34/100 on our Home Mining Score (vs 31/100 for the Innosilicon A10 Pro+ ETH (750Mh)). This composite score factors in noise, power requirements, heat output, size, and setup ease — all critical for residential mining.
Innosilicon A10 Pro+ ETH (750Mh) vs Innosilicon A6 LTCMaster: how much does the efficiency gap matter?
The Innosilicon A10 Pro+ ETH (750Mh) runs at 1,800,000.0 J/TH while the Innosilicon A6 LTCMaster runs at 1,219,512.2 J/TH — a difference of 580,487.8 J/TH. Lower efficiency means less electricity per terahash of mining power, directly reducing operating costs. In relative terms that is 32% better efficiency (1,800,000 vs 1,219,512 J/TH).
Compare Innosilicon A10 Pro+ ETH (750Mh) with...
- Innosilicon A10 Pro+ ETH (750Mh) vs Innosilicon A10 ETHMaster (500Mh)
- Innosilicon A10 Pro+ ETH (750Mh) vs Innosilicon A10 Pro ETH (500Mh)
- Innosilicon A10 Pro+ ETH (750Mh) vs Innosilicon A11 Pro
- Innosilicon A10 Pro+ ETH (750Mh) vs Innosilicon A11 Pro ETH (1500Mh)
- Innosilicon A10 Pro+ ETH (750Mh) vs Innosilicon A4 Dominator
- Innosilicon A10 Pro+ ETH (750Mh) vs Innosilicon A4+ LTCMaster