VOLCMINER D1 vs FluMiner L2
Side-by-side specs, profitability, and home mining comparison.
Specifications Comparison
| VOLCMINER D1 | Specification | FluMiner L2 |
|---|---|---|
| 17.0 GH/s | Hashrate | 1.0 GH/s |
| 3,900 W | Power Consumption | 230 W |
| 229,411.8 J/TH | Efficiency | 230,000.0 J/TH |
| 75 dB | Noise Level | 40 dB |
| — | Weight | — |
| 13,307 BTU/hr | BTU Output | 785 BTU/hr |
| 30/100 | Home Mining Score | 66/100 |
| — | Release Year | — |
| Scrypt | Algorithm | Scrypt |
| VOLCMINER | Manufacturer | FluMiner |
Profitability Comparison
VOLCMINER D1
FluMiner L2
Based on BTC price of $78,184 and current network difficulty as of May 16, 2026. Actual results vary.
Verdict
Run the numbers across every spec and the VOLCMINER D1 edges it: 3 of 6 factors go its way (efficiency, hashrate, price-performance). Its biggest concrete edge: 1600% more hashrate (0.0 vs 0.0 TH/s). The FluMiner L2 claws back ground on power consumption and home mining score and noise level. Review the detailed specs and profitability calculations above to determine which miner best fits your specific setup.
Spec Deltas
Here is every spec where the VOLCMINER D1 and FluMiner L2 actually differ, with the gap quantified:
- VOLCMINER D1 1600% more hashrate (0.0 vs 0.0 TH/s)
- FluMiner L2 94% better power draw (3,900 vs 230 W)
- FluMiner L2 47% better noise (75.0 vs 40.0 dB)
- VOLCMINER D1 1596% more heat output (13,307 vs 785 BTU/hr)
- FluMiner L2 120% more home mining score (30.0 vs 66.0)
Cost & ROI Over Time
Hardware cost is only half the story — here is how each miner's upfront price plays out against cumulative profit at a $0.10/kWh rate.
| VOLCMINER D1 | Metric | FluMiner L2 |
|---|---|---|
| $3,465 | Upfront cost (MSRP) | $331 |
| -$9.36 | Daily net profit | -$0.55 |
| -$6,881 | Net after 1 year | -$533 |
| -$10,297 | Net after 2 years | -$734 |
| -$13,714 | Net after 3 years | -$936 |
| Does not pay back at current rates (negative daily profit) | Payback period | Does not pay back at current rates (negative daily profit) |
Projections assume continuous operation, a flat $0.10/kWh rate, and no hardware degradation, pool fees, or BTC price change. Real-world ROI varies.
Best For...
Best for Profitability
TieBoth miners produce similar daily profit.
Best for Home Mining
FluMiner L2Score: 66/100. 40 dB noise level.
Best for Efficiency
VOLCMINER D1229,411.8 J/TH — lower electricity cost per terahash.
Frequently Asked Questions
Is the VOLCMINER D1 or FluMiner L2 more profitable?
At the current BTC price and a $0.10/kWh electricity rate, the FluMiner L2 is more profitable at $-0.55/day compared to $-9.36/day for the VOLCMINER D1. Profitability depends heavily on your electricity rate — use the selector above to calculate with your actual costs.
VOLCMINER D1 vs FluMiner L2: which runs at a lower noise level?
The FluMiner L2 is quieter at 40 dB compared to the VOLCMINER D1 at 75 dB. For home mining, lower noise levels make a significant difference in livability.
For mining at home, should I pick the VOLCMINER D1 or the FluMiner L2?
The FluMiner L2 scores 66/100 on our Home Mining Score (vs 30/100 for the VOLCMINER D1). This composite score factors in noise, power requirements, heat output, size, and setup ease — all critical for residential mining.
VOLCMINER D1 vs FluMiner L2: how much does the efficiency gap matter?
The VOLCMINER D1 runs at 229,411.8 J/TH while the FluMiner L2 runs at 230,000.0 J/TH — a difference of 588.2 J/TH. Lower efficiency means less electricity per terahash of mining power, directly reducing operating costs.