FluMiner L2 official specifications and operating boundary
L2: manufacturer-supported performance, tolerances, physical, acoustic, network, electrical and environmental evidence.
Quick answer
The FluMiner L2 official specifications and operating boundary is a Scrypt miner rated about 1.2 GH/s at roughly 280 W.
Full Specifications
| Model | FluMiner L2 official specifications and operating boundary |
|---|---|
| Model Number | L2 |
| Manufacturer | FluMiner |
| Algorithm | Scrypt |
| Hashrate | 1.2 GH/s |
| Power Consumption | 280 W |
| Efficiency | 230 J/GH |
| Noise Level | 40 dB |
| Dimensions | 322 x 162 x 162 mm |
| Status | Lifecycle not independently verified |
FluMiner L2 official specification
- 1.2 GH/s ±5%
- 280 W ±10%
- 40 dB manufacturer label under its stated ambient boundary
- 322 x 162 x 162 mm
Input: 100–230 VAC, 50–60 Hz, 16 A maximum; cord included. Ethernet 10/100 and 2.4/5 GHz Wi-Fi. The dated manual specifies −10–35 °C, while its safety section says 0–40 °C; both are preserved as an unresolved document conflict. Speaker guidance of 18–45 °C is not a miner operating range. The acoustic ceiling is 40 dB with ambient below 20 dB.
Efficiency, Normal and Silent mode labels exist, but no per-mode hashrate, power, fan or noise operands were published.
Firmware and current-use boundary
No exact public binary, version, checksum, controller/board matrix or rollback package was authenticated. Web/SD update capability is not a download authorization. Never cross-flash L1, L2, L3, T3 or L1 Pro.
Manufacturer coin labels are workload references, not current compatibility or profitability guarantees. MSRP, BTU, revenue, profit and home-use claims are withheld.