Innosilicon A10 Pro+ ETH (750Mh) vs Innosilicon T3+
Side-by-side specs, profitability, and home mining comparison.
Specifications Comparison
| Innosilicon A10 Pro+ ETH (750Mh) | Specification | Innosilicon T3+ |
|---|---|---|
| 750.0 MH/s | Hashrate | 67.0 TH/s |
| 1,350 W | Power Consumption | 3,300 W |
| 1,800,000.0 J/TH | Efficiency | 49.3 J/TH |
| — | Noise Level | 75 dB |
| 8,100.0 kg | Weight | 12.0 kg |
| 4,606 BTU/hr | BTU Output | 11,260 BTU/hr |
| 31/100 | Home Mining Score | 36/100 |
| — | Release Year | — |
| EtHash | Algorithm | SHA-256 |
| Innosilicon | Manufacturer | Innosilicon |
Profitability Comparison
Innosilicon A10 Pro+ ETH (750Mh)
Innosilicon T3+
Based on BTC price of $76,855 and current network difficulty as of May 18, 2026. Actual results vary.
Verdict
Weighing six performance factors, the Innosilicon T3+ comes out ahead — it takes 5 of 6 (efficiency, hashrate, home mining score, noise level, price-performance). The standout gap is 8933233% more hashrate (0.0 vs 67.0 TH/s) in the Innosilicon T3+'s favour. The Innosilicon A10 Pro+ ETH (750Mh) holds the edge in power consumption. Review the detailed specs and profitability calculations above to determine which miner best fits your specific setup.
Spec Deltas
Here is every spec where the Innosilicon A10 Pro+ ETH (750Mh) and Innosilicon T3+ actually differ, with the gap quantified:
- Innosilicon T3+ 8933233% more hashrate (0.0 vs 67.0 TH/s)
- Innosilicon A10 Pro+ ETH (750Mh) 59% better power draw (1,350 vs 3,300 W)
- Innosilicon T3+ 100% better efficiency (1,800,000.0 vs 49.3 J/TH)
- Innosilicon T3+ 100% better weight (8,100.0 vs 12.0 kg)
- Innosilicon T3+ 144% more heat output (4,606 vs 11,260 BTU/hr)
- Innosilicon T3+ 16% more home mining score (31.0 vs 36.0)
Cost & ROI Over Time
Hardware cost is only half the story — here is how each miner's upfront price plays out against cumulative profit at a $0.10/kWh rate.
| Innosilicon A10 Pro+ ETH (750Mh) | Metric | Innosilicon T3+ |
|---|---|---|
| $800 | Upfront cost (MSRP) | $1,200 |
| -$3.24 | Daily net profit | -$5.55 |
| -$1,983 | Net after 1 year | -$3,226 |
| -$3,165 | Net after 2 years | -$5,252 |
| -$4,348 | Net after 3 years | -$7,278 |
| Does not pay back at current rates (negative daily profit) | Payback period | Does not pay back at current rates (negative daily profit) |
Projections assume continuous operation, a flat $0.10/kWh rate, and no hardware degradation, pool fees, or BTC price change. Real-world ROI varies.
Best For...
Best for Profitability
TieBoth miners produce similar daily profit.
Best for Home Mining
Innosilicon T3+Score: 36/100. 75 dB noise level.
Best for Efficiency
Innosilicon T3+49.3 J/TH — lower electricity cost per terahash.
Frequently Asked Questions
Which makes more money, the Innosilicon A10 Pro+ ETH (750Mh) or the Innosilicon T3+?
At the current BTC price and a $0.10/kWh electricity rate, the Innosilicon A10 Pro+ ETH (750Mh) is more profitable at $-3.24/day compared to $-5.55/day for the Innosilicon T3+. Profitability depends heavily on your electricity rate — use the selector above to calculate with your actual costs.
Is the Innosilicon A10 Pro+ ETH (750Mh) or the Innosilicon T3+ better for noise-sensitive spaces?
The Innosilicon T3+ is quieter at 75 dB compared to the Innosilicon A10 Pro+ ETH (750Mh) at 0 dB. For home mining, lower noise levels make a significant difference in livability.
Which is better for home mining, the Innosilicon A10 Pro+ ETH (750Mh) or Innosilicon T3+?
The Innosilicon T3+ scores 36/100 on our Home Mining Score (vs 31/100 for the Innosilicon A10 Pro+ ETH (750Mh)). This composite score factors in noise, power requirements, heat output, size, and setup ease — all critical for residential mining.
Innosilicon A10 Pro+ ETH (750Mh) vs Innosilicon T3+: how much does the efficiency gap matter?
The Innosilicon A10 Pro+ ETH (750Mh) runs at 1,800,000.0 J/TH while the Innosilicon T3+ runs at 49.3 J/TH — a difference of 1,799,950.8 J/TH. Lower efficiency means less electricity per terahash of mining power, directly reducing operating costs. In relative terms that is 100% better efficiency (1,800,000.0 vs 49.3 J/TH).
Compare Innosilicon A10 Pro+ ETH (750Mh) with...
- Innosilicon A10 Pro+ ETH (750Mh) vs Innosilicon A10 ETHMaster (500Mh)
- Innosilicon A10 Pro+ ETH (750Mh) vs Innosilicon A10 Pro ETH (500Mh)
- Innosilicon A10 Pro+ ETH (750Mh) vs Innosilicon A11 Pro
- Innosilicon A10 Pro+ ETH (750Mh) vs Innosilicon A11 Pro ETH (1500Mh)
- Innosilicon A10 Pro+ ETH (750Mh) vs Innosilicon A4 Dominator
- Innosilicon A10 Pro+ ETH (750Mh) vs Innosilicon A4+ LTCMaster