4479 Desserte Nord Autoroute 440, Laval, QC H7P 6E2

Bitmain Xilinx 7007 Zync Control board Ctrl_C49

Bitmain Xilinx 7007 Zync Control board Ctrl_C49

65.00$

Miner down and you don’t know what to do?

We know that when your mining machine is down, it feels like the world has come to an end. But we’re here to help – with our Replacement Control Board C49 for Antminer S17/S17PRO/T17, you can get your miner back up and running in no time.

Not only do we have the best replacement control boards in the business, but we also have a team of experts who are available 24/7 to help you get your miner back up and running. So don’t lose any more time and purchase a Replacement Control Board C49 for Antminer S17/ S17PRO / T17 today!

Canadian dollar ($)

In stock

x
SHARE

Description

DON’T LOSE A SINGLE MINING MOMENT WITH THESE REPLACEMENT CONTROL BOARDS.

 

Compatible Models:

  • Antminer S17
  • Antminer S17 Pro
  • Antminer T17
  • Antminer T15
  • Antminer S15

 

C49 control board for Antminer S17 / S17PRO / T17 is original control board from Bitmain including software from Bitmain, get your machine back up and running quickly with refurbished replacement control boards talented team at Technologies D-Central

Additional information

Weight 135 g
Dimensions 15 × 15 × 8 cm

Installation Guide

Tools and Materials Needed:

  • Screwdriver
  • New Bitmain Xilinx 7007 Zync Control Board (Ctrl_C49)
  • SD card with specific firmware for your model

Step-by-Step Instructions:

  1. Preparation
    • Power down the miner and unplug it from any power sources.
    • Wear an anti-static wrist strap to prevent static damage.
  2. Remove the Top Cover
    • Unscrew and remove the top cover of your miner to expose the control board.
  3. Disconnect the Old Control Board
    • Carefully disconnect the 3x 18-pin signal cables, PSU power extension cable, voltage regulating cable, and 4x fan cables from the old control board.
  4. Remove the Old Control Board
    • Unscrew and remove the face plate on the miner.
    • Gently slide out the old control board.
  5. Install the New Control Board
    • Carefully slide the new Bitmain Xilinx 7007 Zync control board (Ctrl_C49) into place.
    • Secure the face plate back onto the miner.
  6. Reconnect the Cables
    • Reconnect the 3x 18-pin signal cables, PSU power extension cable, voltage regulating cable, and 4x fan cables to the new control board.
  7. Firmware Installation
    • Insert the SD card with the specific firmware for your model.
    • Power on the miner and wait for the firmware installation to complete.
    • Remove the SD card and reboot the miner.

Reviews

There are no reviews yet.

Be the first to review “Bitmain Xilinx 7007 Zync Control board Ctrl_C49”