Antminer AL1 vs Bitmain Antminer B3 (780Hz)
Side-by-side specs, profitability, and home mining comparison.
Specifications Comparison
| Antminer AL1 | Specification | Bitmain Antminer B3 (780Hz) |
|---|---|---|
| 16.0 TH/s | Taux de hachage | 780.0 H/s |
| 3,360 W | Consommation électrique | 360 W |
| 210.0 J/TH | Efficiency | 0.5 J/TH |
| 75 dB | Niveau de bruit | — |
| 14.5 kg | Weight | — |
| 11,464 BTU/hr | BTU Output | 1,228 BTU/hr |
| 36/100 | Home Mining Score | 34/100 |
| — | Release Year | — |
| Blake3 | Algorithme | Tensority |
| Bitmain | Manufacturer | Bitmain |
Profitability Comparison
Antminer AL1
Bitmain Antminer B3 (780Hz)
Based on BTC price of $64,075 and current network difficulty as of Jun 4, 2026. Actual results vary.
Verdict
Weighing six performance factors, the Bitmain Antminer B3 (780Hz) comes out ahead — it takes 3 of 5 (efficacité, hashrate, consommation électrique). Where it pulls away hardest is 100% better efficacité (210.0 vs 0.5 J/TH). That said, the Antminer AL1 isn't beaten everywhere — it still wins score de minage domestique and niveau sonore. The right pick still depends on your power cost and noise tolerance — the breakdowns above make that call concrete.
Spec Deltas
Here is every spec where the Antminer AL1 and Bitmain Antminer B3 (780Hz) actually differ, with the gap quantified:
- Bitmain Antminer B3 (780Hz) 4775% more hashrate (16.0 vs 780.0 TH/s)
- Bitmain Antminer B3 (780Hz) 89% better power draw (3,360 vs 360 W)
- Bitmain Antminer B3 (780Hz) 100% better efficacité (210.0 vs 0.5 J/TH)
- Antminer AL1 833% more heat output (11,464 vs 1,228 BTU/hr)
- Antminer AL1 6% more score de minage domestique (36.0 vs 34.0)
Cost & ROI Over Time
A miner pays for itself in profit, not specs. These projections track upfront cost against one, two and three years of net earnings at $0.10/kWh.
| Antminer AL1 | Metric | Bitmain Antminer B3 (780Hz) |
|---|---|---|
| $10,000 | Upfront cost (MSRP) | — |
| -$7.60 | Daily net profit | $21.75 |
| -$12,774 | Net after 1 year | +$7,938 |
| -$15,548 | Net after 2 years | +$15,875 |
| -$18,322 | Net after 3 years | +$23,813 |
| Does not pay back at current rates (negative daily profit) | Payback period | — |
Projections assume continuous operation, a flat $0.10/kWh rate, and no hardware degradation, pool fees, or BTC price change. Real-world ROI varies.
Best For...
Best for Profitability
Bitmain Antminer B3 (780Hz)$29.35/day higher profit at current rates.
Best for Home Mining
Antminer AL1Score: 36/100. 75 dB noise level.
Best for Efficiency
Bitmain Antminer B3 (780Hz)0.5 J/TH — lower electricity cost per terahash.
Frequently Asked Questions
Antminer AL1 vs Bitmain Antminer B3 (780Hz): which one earns more per day?
At the current BTC price and a $0.10/kWh electricity rate, the Bitmain Antminer B3 (780Hz) is more profitable at $21.75/day compared to $-7.60/day for the Antminer AL1. Profitability depends heavily on your electricity rate — use the selector above to calculate with your actual costs.
Antminer AL1 vs Bitmain Antminer B3 (780Hz): which runs at a lower noise level?
The Antminer AL1 is quieter at 75 dB compared to the Bitmain Antminer B3 (780Hz) at 0 dB. For home mining, lower noise levels make a significant difference in livability.
For mining at home, should I pick the Antminer AL1 or the Bitmain Antminer B3 (780Hz)?
The Antminer AL1 scores 36/100 on our Home Mining Score (vs 34/100 for the Bitmain Antminer B3 (780Hz)). This composite score factors in noise, power requirements, heat output, size, and setup ease — all critical for residential mining.
How far apart are the Antminer AL1 and Bitmain Antminer B3 (780Hz) on J/TH?
The Antminer AL1 runs at 210.0 J/TH while the Bitmain Antminer B3 (780Hz) runs at 0.5 J/TH — a difference of 209.5 J/TH. Lower efficiency means less electricity per terahash of mining power, directly reducing operating costs. In relative terms that is 100% better efficacité (210.0 vs 0.5 J/TH).