Antminer S19 Pro+ vs Whatsminer M30S++
Side-by-side specs, profitability, and home mining comparison.
Specifications Comparison
| Antminer S19 Pro+ | Specification | Whatsminer M30S++ |
|---|---|---|
| 120.0 TH/s | Taux de hachage | 112.0 TH/s |
| 3,360 W | Consommation électrique | 3,472 W |
| 28.0 J/TH | Efficiency | 31.0 J/TH |
| 75 dB | Niveau de bruit | 75 dB |
| 14.4 kg | Weight | 12.0 kg |
| 11,464 BTU/hr | BTU Output | 11,847 BTU/hr |
| 84/100 | Home Mining Score | 36/100 |
| — | Release Year | — |
| SHA-256 | Algorithme | SHA-256 |
| Bitmain | Manufacturer | MicroBT |
Profitability Comparison
Antminer S19 Pro+
Whatsminer M30S++
Based on BTC price of $62,980 and current network difficulty as of Jun 4, 2026. Actual results vary.
Verdict
Run the numbers across every spec and the Antminer S19 Pro+ edges it: 4 of 5 factors go its way (efficacité, hashrate, consommation électrique, score de minage domestique). The standout gap is 10% better efficacité (28.0 vs 31.0 J/TH) in the Antminer S19 Pro+'s favour. The Whatsminer M30S++ holds the edge in rapport qualité-prix. Review the detailed specs and profitability calculations above to determine which miner best fits your specific setup.
Spec Deltas
The Antminer S19 Pro+ and Whatsminer M30S++ diverge on the metrics below — each gap expressed as a real percentage, not a vague "better":
- Antminer S19 Pro+ 7% more hashrate (120 vs 112 TH/s)
- Antminer S19 Pro+ 3% better power draw (3,360 vs 3,472 W)
- Antminer S19 Pro+ 10% better efficacité (28.0 vs 31.0 J/TH)
- Whatsminer M30S++ 17% better weight (14.4 vs 12.0 kg)
- Whatsminer M30S++ 3% more heat output (11,464 vs 11,847 BTU/hr)
- Antminer S19 Pro+ 133% more score de minage domestique (84.0 vs 36.0)
Cost & ROI Over Time
Hardware cost is only half the story — here is how each miner's upfront price plays out against cumulative profit at a $0.10/kWh rate.
| Antminer S19 Pro+ | Metric | Whatsminer M30S++ |
|---|---|---|
| $3,000 | Upfront cost (MSRP) | $2,300 |
| -$4.64 | Daily net profit | -$5.14 |
| -$4,695 | Net after 1 year | -$4,177 |
| -$6,391 | Net after 2 years | -$6,053 |
| -$8,086 | Net after 3 years | -$7,930 |
| Does not pay back at current rates (negative daily profit) | Payback period | Does not pay back at current rates (negative daily profit) |
Projections assume continuous operation, a flat $0.10/kWh rate, and no hardware degradation, pool fees, or BTC price change. Real-world ROI varies.
Best For...
Best for Profitability
TieBoth miners produce similar daily profit.
Best for Home Mining
Antminer S19 Pro+Score: 84/100. 75 dB noise level.
Best for Efficiency
Antminer S19 Pro+28.0 J/TH — lower electricity cost per terahash.
Frequently Asked Questions
Antminer S19 Pro+ vs Whatsminer M30S++: which one earns more per day?
At the current BTC price and a $0.10/kWh electricity rate, the Antminer S19 Pro+ is more profitable at $-4.64/day compared to $-5.14/day for the Whatsminer M30S++. Profitability depends heavily on your electricity rate — use the selector above to calculate with your actual costs.
Which is quieter, the Antminer S19 Pro+ or Whatsminer M30S++?
Both miners have similar noise levels. Check the specs table above for exact decibel readings.
Which is better for home mining, the Antminer S19 Pro+ or Whatsminer M30S++?
The Antminer S19 Pro+ scores 84/100 on our Home Mining Score (vs 36/100 for the Whatsminer M30S++). This composite score factors in noise, power requirements, heat output, size, and setup ease — all critical for residential mining.
What is the efficiency difference between Antminer S19 Pro+ and Whatsminer M30S++?
The Antminer S19 Pro+ runs at 28.0 J/TH while the Whatsminer M30S++ runs at 31.0 J/TH — a difference of 3.0 J/TH. Lower efficiency means less electricity per terahash of mining power, directly reducing operating costs. In relative terms that is 10% better efficacité (28.0 vs 31.0 J/TH).