Bitmain Antminer S19 multi-bin reference
Official Antminer S19 reference covering 240-Ca and 240-Ch bins: 82-95 TH/s, 2,829-3,250 W, revision-specific efficiency, chassis and weight.
Quick answer
The Bitmain Antminer S19 multi-bin reference is a Bitcoin miner rated about 82-95 TH/s at roughly 2,829 W (about 34 J/TH).
Full Specifications
| Model | Bitmain Antminer S19 multi-bin reference |
|---|---|
| Model Number | Antminer S19 |
| Manufacturer | Bitmain |
| Algorithm | SHA-256 |
| Hashrate | 82-95 TH/s |
| Power Consumption | 2,829-3,250 W |
| Cooling | air |
| Voltage Range | 200-240 V AC; 47-63 Hz |
| Operating Temperature | 0 C to 40 C |
| Interface | RJ45 Ethernet 10/100M |
| Status | OEM support reference |
Official multi-bin reference: Bitmain’s updated S19 specification covers five bins across 240-Ca and 240-Ch. Published nominal hashrate spans 82–95 TH/s, wall power spans 2,829–3,250 W at 25°C, and efficiency spans 34–36 J/TH. Hashrate is rated ±3%; power and efficiency are rated ±5%.
The 240-Ca 95T lane is 95 TH/s, 3,250 W, and 34 J/TH. Other S19 bins differ: 240-Ca 90T is 3,250 W and 36 J/TH; 240-Ch 90T/86T/82T are 3,105/2,967/2,829 W at 34.5 J/TH. Verify both model number and bin.
Common requirements are 200–240 V AC, 47–63 Hz, 20 A maximum-condition input split across two 10 A inputs, RJ45 Ethernet 10/100M, 0–40°C operation, 10–90% non-condensing RH, and altitude up to 2,000 m with temperature derating. Physical records differ: 240-Ca is 400 × 195.5 × 290 mm and 14.2 kg net; 240-Ch is 430 × 195.5 × 290 mm and 15.5 kg net, including PSU.
Unknown or revision-dependent: the source does not publish a sound-pressure rating, exact ASIC name/count, or one universal control-board revision. Current price, availability, and a specific sold configuration belong to an exact product listing, not this model reference.
Electrical and airflow gate
Air-cooled industrial hardware. Confirm the unit’s nameplate, manual revision, inlet and exhaust path, conductor and connector ratings, protection, ambient conditions, and local electrical requirements before installation. This reference is not a branch-circuit or PSU-sizing instruction.
Firmware and recovery
The S19 model name is not sufficient to select firmware, recovery media, a control board, or a replacement hashboard. Record the complete model label, controller-board marking, installed firmware version, visible interface type, and symptom. Port or slot appearance is only a clue.
- Identify the exact control-board revision before firmware or recovery.
- After the model and board both match, review the current manufacturer firmware entry and board-scoped recovery boundary.
- For no boot, conflicts, instability, interrupted writing, or electrical, thermal, or physical symptoms, request Antminer diagnosis.
Exact purchase configuration
View the separate S19 product listing. Confirm its rated bin, condition, PSU, warranty, and stock state on the listing; they are not inherited by this reference page.
Primary sources: Bitmain S19 specification matrix and S19/S19 Pro setup guide. Reviewed August 27, 2026.