Bitmain Antminer S19j Pro multi-bin reference
Official Antminer S19j Pro reference covering six 240-Cb bins: 84-104 TH/s, 2,478-3,068 W and 29.5 J/TH, with exact tolerance distinctions.
Quick answer
The Bitmain Antminer S19j Pro multi-bin reference is a Bitcoin miner rated about 84-104 TH/s at roughly 2,478 W (about 29.5 J/TH).
Full Specifications
| Model | Bitmain Antminer S19j Pro multi-bin reference |
|---|---|
| Model Number | Antminer S19j Pro |
| Manufacturer | Bitmain |
| Algorithm | SHA-256 |
| Hashrate | 84-104 TH/s |
| Power Consumption | 2,478-3,068 W |
| Cooling | air |
| Voltage Range | 200-240 V AC; 47-63 Hz |
| Operating Temperature | 0 C to 40 C |
| Dimensions | 400 x 195.5 x 290 mm including PSU |
| Weight | 14.6 kg net including PSU |
| Interface | RJ45 Ethernet 10/100M |
| Status | OEM support reference |
Official multi-bin reference: Bitmain’s updated S19j Pro specification spans six model 240-Cb bins: 84, 88, 92, 96, 100, and 104 TH/s. Corresponding nominal wall power at 25°C spans 2,478–3,068 W, with 29.5 J/TH ±5% across the published bins.
The OEM tolerance notation differs by lane: the 92–104T rows print ±3%, while the 84T and 88T rows print +3%. This reference preserves that distinction rather than silently applying a symmetric tolerance to every bin.
This resolves the former title/hero conflict: 100 TH/s and 104 TH/s are separate manufacturer-listed bins, not interchangeable values for one unit. Verify the exact nameplate bin before using any power figure.
The guide lists 200–240 V AC, 47–63 Hz, 20 A maximum-condition input split across two 10 A inputs, RJ45 Ethernet 10/100M, a 400 × 195.5 × 290 mm server including its PSU, 14.6 kg net weight, 0–40°C specification-table operation, 10–90% non-condensing RH, and altitude up to 2,000 m with temperature derating. Its preliminary use section separately recommends 5–35°C and humidity below 65%.
Unknown or revision-dependent: the source does not publish a sound-pressure rating, exact ASIC name/count, or one universal control-board revision. No custom tuning range or direct rollback path is asserted here.
Electrical and airflow gate
Air-cooled industrial hardware. Confirm the exact bin, nameplate, manual revision, airflow path, conductor and connector ratings, protection, ambient conditions, and local electrical requirements before installation. This reference is not a branch-circuit or PSU-sizing instruction.
Firmware and recovery
The S19j Pro model name is not sufficient to choose firmware or recovery. Bitmain’s current selection material separates board categories, so record the exact controller-board marking, installed firmware version, visible interface type, and symptom before selecting anything.
- Identify the exact control-board revision before firmware or recovery.
- After the model and board both match, review the current manufacturer firmware entry and board-scoped recovery boundary.
- For no boot, conflicts, instability, interrupted writing, or electrical, thermal, or physical symptoms, request Antminer diagnosis.
Exact purchase configuration
View the separate S19j Pro product listing. Confirm its exact hashrate bin, condition, PSU, warranty, and stock state on the listing.
Primary sources: Bitmain S19j Pro specification matrix and S19j Pro setup guide. Reviewed August 27, 2026.