Innosilicon A10 Pro ETH (500Mh) vs iPollo V1 Hyd
Side-by-side specs, profitability, and home mining comparison.
Specifications Comparison
| Innosilicon A10 Pro ETH (500Mh) | Specification | iPollo V1 Hyd |
|---|---|---|
| 500.0 MH/s | Hashrate | 900.0 MH/s |
| 960 W | Power Consumption | 800 W |
| 1,920,000.0 J/TH | Efficiency | 888,888.9 J/TH |
| — | Noise Level | — |
| 8,100.0 kg | Weight | 8.0 kg |
| 3,276 BTU/hr | BTU Output | 2,730 BTU/hr |
| 31/100 | Home Mining Score | 30/100 |
| — | Release Year | — |
| EtHash | Algorithm | EtHash |
| Innosilicon | Manufacturer | iPollo |
Profitability Comparison
Innosilicon A10 Pro ETH (500Mh)
iPollo V1 Hyd
Based on BTC price of $78,257 and current network difficulty as of May 16, 2026. Actual results vary.
Verdict
Based on our multi-factor analysis, the iPollo V1 Hyd wins on 3 of 4 factors (efficiency, power consumption, price-performance). The standout gap is 54% better efficiency (1,920,000 vs 888,889 J/TH) in the iPollo V1 Hyd's favour. That said, the Innosilicon A10 Pro ETH (500Mh) isn't beaten everywhere — it still wins home mining score. Cross-check the spec deltas and ROI table above against your own electricity rate before deciding.
Spec Deltas
Stripped to the numbers, this is how far apart the Innosilicon A10 Pro ETH (500Mh) and iPollo V1 Hyd sit on each measurable spec:
- iPollo V1 Hyd 80% more hashrate (0.0 vs 0.0 TH/s)
- iPollo V1 Hyd 17% better power draw (960 vs 800 W)
- iPollo V1 Hyd 54% better efficiency (1,920,000 vs 888,889 J/TH)
- iPollo V1 Hyd 100% better weight (8,100.0 vs 8.0 kg)
- Innosilicon A10 Pro ETH (500Mh) 20% more heat output (3,276 vs 2,730 BTU/hr)
- Innosilicon A10 Pro ETH (500Mh) 3% more home mining score (31.0 vs 30.0)
Cost & ROI Over Time
Sticker price versus what the miner actually earns back: the table below projects cumulative net profit at a $0.10/kWh electricity rate.
| Innosilicon A10 Pro ETH (500Mh) | Metric | iPollo V1 Hyd |
|---|---|---|
| $469 | Upfront cost (MSRP) | $489 |
| -$2.30 | Daily net profit | -$1.92 |
| -$1,310 | Net after 1 year | -$1,190 |
| -$2,151 | Net after 2 years | -$1,891 |
| -$2,992 | Net after 3 years | -$2,591 |
| Does not pay back at current rates (negative daily profit) | Payback period | Does not pay back at current rates (negative daily profit) |
Projections assume continuous operation, a flat $0.10/kWh rate, and no hardware degradation, pool fees, or BTC price change. Real-world ROI varies.
Best For...
Best for Profitability
TieBoth miners produce similar daily profit.
Best for Home Mining
Innosilicon A10 Pro ETH (500Mh)Score: 31/100. 0 dB noise level.
Best for Efficiency
iPollo V1 Hyd888,888.9 J/TH — lower electricity cost per terahash.
Frequently Asked Questions
Which makes more money, the Innosilicon A10 Pro ETH (500Mh) or the iPollo V1 Hyd?
At the current BTC price and a $0.10/kWh electricity rate, the iPollo V1 Hyd is more profitable at $-1.92/day compared to $-2.30/day for the Innosilicon A10 Pro ETH (500Mh). Profitability depends heavily on your electricity rate — use the selector above to calculate with your actual costs.
Innosilicon A10 Pro ETH (500Mh) vs iPollo V1 Hyd: which runs at a lower noise level?
Both miners have similar noise levels. Check the specs table above for exact decibel readings.
Innosilicon A10 Pro ETH (500Mh) vs iPollo V1 Hyd: which fits a residential setup better?
The Innosilicon A10 Pro ETH (500Mh) scores 31/100 on our Home Mining Score (vs 30/100 for the iPollo V1 Hyd). This composite score factors in noise, power requirements, heat output, size, and setup ease — all critical for residential mining.
Innosilicon A10 Pro ETH (500Mh) vs iPollo V1 Hyd: how much does the efficiency gap matter?
The Innosilicon A10 Pro ETH (500Mh) runs at 1,920,000.0 J/TH while the iPollo V1 Hyd runs at 888,888.9 J/TH — a difference of 1,031,111.1 J/TH. Lower efficiency means less electricity per terahash of mining power, directly reducing operating costs. In relative terms that is 54% better efficiency (1,920,000 vs 888,889 J/TH).
Compare Innosilicon A10 Pro ETH (500Mh) with...
- Innosilicon A10 Pro ETH (500Mh) vs Innosilicon A10 ETHMaster (500Mh)
- Innosilicon A10 Pro ETH (500Mh) vs Innosilicon A10 Pro+ ETH (750Mh)
- Innosilicon A10 Pro ETH (500Mh) vs Innosilicon A11 Pro
- Innosilicon A10 Pro ETH (500Mh) vs Innosilicon A11 Pro ETH (1500Mh)
- Innosilicon A10 Pro ETH (500Mh) vs Innosilicon A4 Dominator
- Innosilicon A10 Pro ETH (500Mh) vs Innosilicon A4+ LTCMaster