Bitmain Antminer L11.HU6 (33Gh) vs Fluminer L1
Side-by-side specs, profitability, and home mining comparison.
Specifications Comparison
| Bitmain Antminer L11.HU6 (33Gh) | Specification | Fluminer L1 |
|---|---|---|
| 33.0 GH/s | Hashrate | 5.3 GH/s |
| 5,676 W | Power Consumption | 1,200 W |
| 172,000.0 J/TH | Efficiency | 226,415.1 J/TH |
| 50 dB | Noise Level | 40 dB |
| — | Weight | 10.0 kg |
| 19,367 BTU/hr | BTU Output | 4,094 BTU/hr |
| 44/100 | Home Mining Score | 66/100 |
| — | Release Year | — |
| Scrypt | Algorithm | Scrypt |
| Bitmain | Manufacturer | FluMiner |
Profitability Comparison
Bitmain Antminer L11.HU6 (33Gh)
Fluminer L1
Based on BTC price of $78,165 and current network difficulty as of May 16, 2026. Actual results vary.
Verdict
The Bitmain Antminer L11.HU6 (33Gh) and Fluminer L1 finish in a near dead heat in our weighted scoring. There is no wrong answer here — let your electricity rate, noise tolerance and budget break the tie using the breakdowns above.
Spec Deltas
Here is every spec where the Bitmain Antminer L11.HU6 (33Gh) and Fluminer L1 actually differ, with the gap quantified:
- Bitmain Antminer L11.HU6 (33Gh) 523% more hashrate (0.0 vs 0.0 TH/s)
- Fluminer L1 79% better power draw (5,676 vs 1,200 W)
- Bitmain Antminer L11.HU6 (33Gh) 24% better efficiency (172,000 vs 226,415 J/TH)
- Fluminer L1 20% better noise (50.0 vs 40.0 dB)
- Bitmain Antminer L11.HU6 (33Gh) 373% more heat output (19,367 vs 4,094 BTU/hr)
- Fluminer L1 50% more home mining score (44.0 vs 66.0)
Cost & ROI Over Time
Hardware cost is only half the story — here is how each miner's upfront price plays out against cumulative profit at a $0.10/kWh rate.
| Bitmain Antminer L11.HU6 (33Gh) | Metric | Fluminer L1 |
|---|---|---|
| $16,888 | Upfront cost (MSRP) | $1,452 |
| -$13.62 | Daily net profit | -$2.88 |
| -$21,860 | Net after 1 year | -$2,503 |
| -$26,831 | Net after 2 years | -$3,554 |
| -$31,803 | Net after 3 years | -$4,605 |
| Does not pay back at current rates (negative daily profit) | Payback period | Does not pay back at current rates (negative daily profit) |
Projections assume continuous operation, a flat $0.10/kWh rate, and no hardware degradation, pool fees, or BTC price change. Real-world ROI varies.
Best For...
Best for Profitability
TieBoth miners produce similar daily profit.
Best for Home Mining
Fluminer L1Score: 66/100. 40 dB noise level.
Best for Efficiency
Bitmain Antminer L11.HU6 (33Gh)172,000.0 J/TH — lower electricity cost per terahash.
Frequently Asked Questions
Is the Bitmain Antminer L11.HU6 (33Gh) or Fluminer L1 more profitable?
At the current BTC price and a $0.10/kWh electricity rate, the Fluminer L1 is more profitable at $-2.88/day compared to $-13.62/day for the Bitmain Antminer L11.HU6 (33Gh). Profitability depends heavily on your electricity rate — use the selector above to calculate with your actual costs.
Bitmain Antminer L11.HU6 (33Gh) vs Fluminer L1: which runs at a lower noise level?
The Fluminer L1 is quieter at 40 dB compared to the Bitmain Antminer L11.HU6 (33Gh) at 50 dB. For home mining, lower noise levels make a significant difference in livability.
For mining at home, should I pick the Bitmain Antminer L11.HU6 (33Gh) or the Fluminer L1?
The Fluminer L1 scores 66/100 on our Home Mining Score (vs 44/100 for the Bitmain Antminer L11.HU6 (33Gh)). This composite score factors in noise, power requirements, heat output, size, and setup ease — all critical for residential mining.
How far apart are the Bitmain Antminer L11.HU6 (33Gh) and Fluminer L1 on J/TH?
The Bitmain Antminer L11.HU6 (33Gh) runs at 172,000.0 J/TH while the Fluminer L1 runs at 226,415.1 J/TH — a difference of 54,415.1 J/TH. Lower efficiency means less electricity per terahash of mining power, directly reducing operating costs. In relative terms that is 24% better efficiency (172,000 vs 226,415 J/TH).