FluMiner L1 official specifications and operating boundary
L1: manufacturer-supported performance, tolerances, physical, acoustic, network, electrical and environmental evidence.
Quick answer
The FluMiner L1 official specifications and operating boundary is a Scrypt miner rated about 5.3 GH/s at roughly 1,200 W.
Full Specifications
| Model | FluMiner L1 official specifications and operating boundary |
|---|---|
| Model Number | L1 |
| Manufacturer | FluMiner |
| Algorithm | Scrypt |
| Hashrate | 5.3 GH/s |
| Power Consumption | 1,200 W |
| Efficiency | 230 J/GH |
| Noise Level | 45 dB |
| Dimensions | 447 x 350 x 131 mm |
| Status | Lifecycle not independently verified |
FluMiner L1 official specification
- 5.3 GH/s ±10%
- 1200 W ±10%
- 45 dB manufacturer label under its stated ambient boundary
- 447 x 350 x 131 mm
Input: 100–230 VAC, 50–60 Hz, 16 A maximum; supplied cord. Ethernet 10/100 and 2.4/5 GHz Wi-Fi. Operating 0–40 °C, 10–90% RH non-condensing, altitude no more than 2000 m. The acoustic label is approximately 45 dB with ambient below 20 dB.
No numeric mode table is published.
Firmware and current-use boundary
No exact public binary, version, checksum, controller/board matrix or rollback package was authenticated. Web/SD update capability is not a download authorization. Never cross-flash L1, L2, L3, T3 or L1 Pro.
Manufacturer coin labels are workload references, not current compatibility or profitability guarantees. MSRP, BTU, revenue, profit and home-use claims are withheld.