Innosilicon T2 Turbo HF+

Hashrate 33.0 TH/s Power 2,600 W Efficiency 78.8 J/TH

Whatsminer M30S++ (Hydro)

Hashrate 112.0 TH/s Power 3,472 W Efficiency 31.0 J/TH

Innosilicon T2 Turbo HF+ vs Whatsminer M30S++ (Hydro)

Side-by-side specs, profitability, and home mining comparison.

Specifications Comparison

Innosilicon T2 Turbo HF+	Specification	Whatsminer M30S++ (Hydro)
33.0 TH/s	Hashrate	112.0 TH/s
2,600 W	Power Consumption	3,472 W
78.8 J/TH	Efficiency	31.0 J/TH
—	Noise Level	50 dB
10,000.0 kg	Weight	12.0 kg
8,871 BTU/hr	BTU Output	11,847 BTU/hr
22/100	Home Mining Score	50/100
—	Release Year	—
SHA-256	Algorithm	SHA-256
Innosilicon	Manufacturer	MicroBT

Profitability Comparison

Electricity Rate:

$/kWh

Innosilicon T2 Turbo HF+

Daily Revenue 0.00001519 BTC $1.17

Daily Electricity -$6.24

Daily Profit -$5.07

Monthly -$152.13

Yearly -$1,850.90

Whatsminer M30S++ (Hydro)

Daily Revenue 0.00005154 BTC $3.97

Daily Electricity -$8.33

Daily Profit -$4.37

Monthly -$130.95

Yearly -$1,593.26

Based on BTC price of $76,982 and current network difficulty as of May 18, 2026. Actual results vary.

Verdict

Our scoring model gives the nod to the Whatsminer M30S++ (Hydro), which leads on 4 of 5 weighted factors (efficiency, hashrate, home mining score, noise level). Its biggest concrete edge: 239% more hashrate (33.0 vs 112.0 TH/s). That said, the Innosilicon T2 Turbo HF+ isn't beaten everywhere — it still wins power consumption. The right pick still depends on your power cost and noise tolerance — the breakdowns above make that call concrete.

Winner: Whatsminer M30S++ (Hydro) — wins on 4 of 5 factors

Spec Deltas

The Innosilicon T2 Turbo HF+ and Whatsminer M30S++ (Hydro) diverge on the metrics below — each gap expressed as a real percentage, not a vague "better":

Whatsminer M30S++ (Hydro) 239% more hashrate (33.0 vs 112.0 TH/s)
Innosilicon T2 Turbo HF+ 25% better power draw (2,600 vs 3,472 W)
Whatsminer M30S++ (Hydro) 61% better efficiency (78.8 vs 31.0 J/TH)
Whatsminer M30S++ (Hydro) 100% better weight (10,000.0 vs 12.0 kg)
Whatsminer M30S++ (Hydro) 34% more heat output (8,871 vs 11,847 BTU/hr)
Whatsminer M30S++ (Hydro) 127% more home mining score (22.0 vs 50.0)

Cost & ROI Over Time

Hardware cost is only half the story — here is how each miner's upfront price plays out against cumulative profit at a $0.10/kWh rate.

Innosilicon T2 Turbo HF+	Metric	Whatsminer M30S++ (Hydro)
—	Upfront cost (MSRP)	$3,000
-$5.07	Daily net profit	-$4.37
-$1,851	Net after 1 year	-$4,593
-$3,702	Net after 2 years	-$6,187
-$5,553	Net after 3 years	-$7,780
—	Payback period	Does not pay back at current rates (negative daily profit)

Projections assume continuous operation, a flat $0.10/kWh rate, and no hardware degradation, pool fees, or BTC price change. Real-world ROI varies.

Best For...

Best for Profitability

Tie

Both miners produce similar daily profit.

Best for Home Mining

Whatsminer M30S++ (Hydro)

Score: 50/100. 50 dB noise level.

Best for Efficiency

Whatsminer M30S++ (Hydro)

31.0 J/TH — lower electricity cost per terahash.

Frequently Asked Questions

Is the Innosilicon T2 Turbo HF+ or Whatsminer M30S++ (Hydro) more profitable?

At the current BTC price and a $0.10/kWh electricity rate, the Whatsminer M30S++ (Hydro) is more profitable at $-4.37/day compared to $-5.07/day for the Innosilicon T2 Turbo HF+. Profitability depends heavily on your electricity rate — use the selector above to calculate with your actual costs.

Which is quieter, the Innosilicon T2 Turbo HF+ or Whatsminer M30S++ (Hydro)?

The Whatsminer M30S++ (Hydro) is quieter at 50 dB compared to the Innosilicon T2 Turbo HF+ at 0 dB. For home mining, lower noise levels make a significant difference in livability.

For mining at home, should I pick the Innosilicon T2 Turbo HF+ or the Whatsminer M30S++ (Hydro)?

The Whatsminer M30S++ (Hydro) scores 50/100 on our Home Mining Score (vs 22/100 for the Innosilicon T2 Turbo HF+). This composite score factors in noise, power requirements, heat output, size, and setup ease — all critical for residential mining.

What is the efficiency difference between Innosilicon T2 Turbo HF+ and Whatsminer M30S++ (Hydro)?

The Innosilicon T2 Turbo HF+ runs at 78.8 J/TH while the Whatsminer M30S++ (Hydro) runs at 31.0 J/TH — a difference of 47.8 J/TH. Lower efficiency means less electricity per terahash of mining power, directly reducing operating costs. In relative terms that is 61% better efficiency (78.8 vs 31.0 J/TH).

Compare Innosilicon T2 Turbo HF+ with...

Compare Whatsminer M30S++ (Hydro) with...

Shop Miners Browse our full catalog of ASIC miners, Bitaxe, and accessories. ASIC Repair 2,500+ miners repaired. Expert diagnostics and board-level repair. Miner Database Compare 500+ miners with live profitability data.