Innosilicon A10 Pro+ ETH (750Mh) vs iPollo V2
Side-by-side specs, profitability, and home mining comparison.
Specifications Comparison
| Innosilicon A10 Pro+ ETH (750Mh) | Specification | iPollo V2 |
|---|---|---|
| 750.0 MH/s | Hashrate | 10.0 GH/s |
| 1,350 W | Power Consumption | 1,500 W |
| 1,800,000.0 J/TH | Efficiency | 150,000.0 J/TH |
| — | Noise Level | 75 dB |
| 8,100.0 kg | Weight | 16.5 kg |
| 4,606 BTU/hr | BTU Output | 5,118 BTU/hr |
| 31/100 | Home Mining Score | 48/100 |
| — | Release Year | — |
| EtHash | Algorithm | EtHash |
| Innosilicon | Manufacturer | iPollo |
Profitability Comparison
Innosilicon A10 Pro+ ETH (750Mh)
iPollo V2
Based on BTC price of $78,165 and current network difficulty as of May 16, 2026. Actual results vary.
Verdict
Our scoring model gives the nod to the iPollo V2, which leads on 5 of 6 weighted factors (efficiency, hashrate, home mining score, noise level, price-performance). Its biggest concrete edge: 1233% more hashrate (0.0 vs 0.0 TH/s). The Innosilicon A10 Pro+ ETH (750Mh) holds the edge in power consumption. Review the detailed specs and profitability calculations above to determine which miner best fits your specific setup.
Spec Deltas
The Innosilicon A10 Pro+ ETH (750Mh) and iPollo V2 diverge on the metrics below — each gap expressed as a real percentage, not a vague "better":
- iPollo V2 1233% more hashrate (0.0 vs 0.0 TH/s)
- Innosilicon A10 Pro+ ETH (750Mh) 10% better power draw (1,350 vs 1,500 W)
- iPollo V2 92% better efficiency (1,800,000 vs 150,000 J/TH)
- iPollo V2 100% better weight (8,100.0 vs 16.5 kg)
- iPollo V2 11% more heat output (4,606 vs 5,118 BTU/hr)
- iPollo V2 55% more home mining score (31.0 vs 48.0)
Cost & ROI Over Time
Sticker price versus what the miner actually earns back: the table below projects cumulative net profit at a $0.10/kWh electricity rate.
| Innosilicon A10 Pro+ ETH (750Mh) | Metric | iPollo V2 |
|---|---|---|
| $800 | Upfront cost (MSRP) | $5,140 |
| -$3.24 | Daily net profit | -$3.60 |
| -$1,983 | Net after 1 year | -$6,454 |
| -$3,165 | Net after 2 years | -$7,768 |
| -$4,348 | Net after 3 years | -$9,082 |
| Does not pay back at current rates (negative daily profit) | Payback period | Does not pay back at current rates (negative daily profit) |
Projections assume continuous operation, a flat $0.10/kWh rate, and no hardware degradation, pool fees, or BTC price change. Real-world ROI varies.
Best For...
Best for Profitability
TieBoth miners produce similar daily profit.
Best for Home Mining
iPollo V2Score: 48/100. 75 dB noise level.
Best for Efficiency
iPollo V2150,000.0 J/TH — lower electricity cost per terahash.
Frequently Asked Questions
Which makes more money, the Innosilicon A10 Pro+ ETH (750Mh) or the iPollo V2?
At the current BTC price and a $0.10/kWh electricity rate, the Innosilicon A10 Pro+ ETH (750Mh) is more profitable at $-3.24/day compared to $-3.60/day for the iPollo V2. Profitability depends heavily on your electricity rate — use the selector above to calculate with your actual costs.
Innosilicon A10 Pro+ ETH (750Mh) vs iPollo V2: which runs at a lower noise level?
The iPollo V2 is quieter at 75 dB compared to the Innosilicon A10 Pro+ ETH (750Mh) at 0 dB. For home mining, lower noise levels make a significant difference in livability.
Which is better for home mining, the Innosilicon A10 Pro+ ETH (750Mh) or iPollo V2?
The iPollo V2 scores 48/100 on our Home Mining Score (vs 31/100 for the Innosilicon A10 Pro+ ETH (750Mh)). This composite score factors in noise, power requirements, heat output, size, and setup ease — all critical for residential mining.
Innosilicon A10 Pro+ ETH (750Mh) vs iPollo V2: how much does the efficiency gap matter?
The Innosilicon A10 Pro+ ETH (750Mh) runs at 1,800,000.0 J/TH while the iPollo V2 runs at 150,000.0 J/TH — a difference of 1,650,000.0 J/TH. Lower efficiency means less electricity per terahash of mining power, directly reducing operating costs. In relative terms that is 92% better efficiency (1,800,000 vs 150,000 J/TH).
Compare Innosilicon A10 Pro+ ETH (750Mh) with...
- Innosilicon A10 Pro+ ETH (750Mh) vs Innosilicon A10 ETHMaster (500Mh)
- Innosilicon A10 Pro+ ETH (750Mh) vs Innosilicon A10 Pro ETH (500Mh)
- Innosilicon A10 Pro+ ETH (750Mh) vs Innosilicon A11 Pro
- Innosilicon A10 Pro+ ETH (750Mh) vs Innosilicon A11 Pro ETH (1500Mh)
- Innosilicon A10 Pro+ ETH (750Mh) vs Innosilicon A4 Dominator
- Innosilicon A10 Pro+ ETH (750Mh) vs Innosilicon A4+ LTCMaster