Innosilicon A10 Pro+ ETH (750Mh)

Hashrate 750.0 MH/s Power 1,350 W Efficiency 1,800,000.0 J/TH

iPollo V1

Hashrate 3.6 GH/s Power 3,100 W Efficiency 861,111.1 J/TH

Innosilicon A10 Pro+ ETH (750Mh) vs iPollo V1

Side-by-side specs, profitability, and home mining comparison.

Specifications Comparison

Innosilicon A10 Pro+ ETH (750Mh)	Specification	iPollo V1
750.0 MH/s	Hashrate	3.6 GH/s
1,350 W	Power Consumption	3,100 W
1,800,000.0 J/TH	Efficiency	861,111.1 J/TH
—	Noise Level	—
8,100.0 kg	Weight	13,000.0 kg
4,606 BTU/hr	BTU Output	10,577 BTU/hr
31/100	Home Mining Score	22/100
—	Release Year	—
EtHash	Algorithm	EtHash
Innosilicon	Manufacturer	iPollo

Profitability Comparison

Electricity Rate:

$/kWh

Innosilicon A10 Pro+ ETH (750Mh)

Daily Revenue 0.00000000 BTC $0.00

Daily Electricity -$3.24

Daily Profit -$3.24

Monthly -$97.20

Yearly -$1,182.59

iPollo V1

Daily Revenue 0.00000000 BTC $0.00

Daily Electricity -$7.44

Daily Profit -$7.44

Monthly -$223.20

Yearly -$2,715.55

Based on BTC price of $78,226 and current network difficulty as of May 16, 2026. Actual results vary.

Verdict

Based on our multi-factor analysis, the iPollo V1 wins on 3 of 5 factors (efficiency, hashrate, price-performance). Its biggest concrete edge: 380% more hashrate (0.0 vs 0.0 TH/s). The Innosilicon A10 Pro+ ETH (750Mh) claws back ground on power consumption and home mining score. Review the detailed specs and profitability calculations above to determine which miner best fits your specific setup.

Winner: iPollo V1 — wins on 3 of 5 factors

Spec Deltas

The Innosilicon A10 Pro+ ETH (750Mh) and iPollo V1 diverge on the metrics below — each gap expressed as a real percentage, not a vague "better":

iPollo V1 380% more hashrate (0.0 vs 0.0 TH/s)
Innosilicon A10 Pro+ ETH (750Mh) 56% better power draw (1,350 vs 3,100 W)
iPollo V1 52% better efficiency (1,800,000 vs 861,111 J/TH)
Innosilicon A10 Pro+ ETH (750Mh) 38% better weight (8,100 vs 13,000 kg)
iPollo V1 130% more heat output (4,606 vs 10,577 BTU/hr)
Innosilicon A10 Pro+ ETH (750Mh) 41% more home mining score (31.0 vs 22.0)

Cost & ROI Over Time

A miner pays for itself in profit, not specs. These projections track upfront cost against one, two and three years of net earnings at $0.10/kWh.

Innosilicon A10 Pro+ ETH (750Mh)	Metric	iPollo V1
$800	Upfront cost (MSRP)	$1,699
-$3.24	Daily net profit	-$7.44
-$1,983	Net after 1 year	-$4,415
-$3,165	Net after 2 years	-$7,130
-$4,348	Net after 3 years	-$9,846
Does not pay back at current rates (negative daily profit)	Payback period	Does not pay back at current rates (negative daily profit)

Projections assume continuous operation, a flat $0.10/kWh rate, and no hardware degradation, pool fees, or BTC price change. Real-world ROI varies.

Best For...

Best for Profitability

Tie

Both miners produce similar daily profit.

Best for Home Mining

Innosilicon A10 Pro+ ETH (750Mh)

Score: 31/100. 0 dB noise level.

Best for Efficiency

iPollo V1

861,111.1 J/TH — lower electricity cost per terahash.

Frequently Asked Questions

Is the Innosilicon A10 Pro+ ETH (750Mh) or iPollo V1 more profitable?

At the current BTC price and a $0.10/kWh electricity rate, the Innosilicon A10 Pro+ ETH (750Mh) is more profitable at $-3.24/day compared to $-7.44/day for the iPollo V1. Profitability depends heavily on your electricity rate — use the selector above to calculate with your actual costs.

Innosilicon A10 Pro+ ETH (750Mh) vs iPollo V1: which runs at a lower noise level?

Both miners have similar noise levels. Check the specs table above for exact decibel readings.

For mining at home, should I pick the Innosilicon A10 Pro+ ETH (750Mh) or the iPollo V1?

The Innosilicon A10 Pro+ ETH (750Mh) scores 31/100 on our Home Mining Score (vs 22/100 for the iPollo V1). This composite score factors in noise, power requirements, heat output, size, and setup ease — all critical for residential mining.

Innosilicon A10 Pro+ ETH (750Mh) vs iPollo V1: how much does the efficiency gap matter?

The Innosilicon A10 Pro+ ETH (750Mh) runs at 1,800,000.0 J/TH while the iPollo V1 runs at 861,111.1 J/TH — a difference of 938,888.9 J/TH. Lower efficiency means less electricity per terahash of mining power, directly reducing operating costs. In relative terms that is 52% better efficiency (1,800,000 vs 861,111 J/TH).

Compare Innosilicon A10 Pro+ ETH (750Mh) with...

Compare iPollo V1 with...

Shop Miners Browse our full catalog of ASIC miners, Bitaxe, and accessories. ASIC Repair 2,500+ miners repaired. Expert diagnostics and board-level repair. Miner Database Compare 500+ miners with live profitability data.