MicroBT Whatsminer M10S vs Whatsminer M63S
Side-by-side specs, profitability, and home mining comparison.
Specifications Comparison
| MicroBT Whatsminer M10S | Specification | Whatsminer M63S |
|---|---|---|
| 55.0 TH/s | Hashrate | 390.0 TH/s |
| 3,500 W | Power Consumption | 7,215 W |
| 63.6 J/TH | Efficiency | 18.5 J/TH |
| — | Noise Level | 50 dB |
| 10,700.0 kg | Weight | 28.0 kg |
| 11,942 BTU/hr | BTU Output | 24,618 BTU/hr |
| 22/100 | Home Mining Score | 44/100 |
| — | Release Year | — |
| SHA-256 | Algorithm | SHA-256 |
| MicroBT | Manufacturer | MicroBT |
Profitability Comparison
MicroBT Whatsminer M10S
Whatsminer M63S
Based on BTC price of $78,051 and current network difficulty as of May 16, 2026. Actual results vary.
Verdict
Based on our multi-factor analysis, the Whatsminer M63S wins on 5 of 6 factors (efficiency, hashrate, home mining score, noise level, price-performance). Its biggest concrete edge: 609% more hashrate (55.0 vs 390.0 TH/s). The MicroBT Whatsminer M10S claws back ground on power consumption. Review the detailed specs and profitability calculations above to determine which miner best fits your specific setup.
Spec Deltas
Stripped to the numbers, this is how far apart the MicroBT Whatsminer M10S and Whatsminer M63S sit on each measurable spec:
- Whatsminer M63S 609% more hashrate (55.0 vs 390.0 TH/s)
- MicroBT Whatsminer M10S 51% better power draw (3,500 vs 7,215 W)
- Whatsminer M63S 71% better efficiency (63.6 vs 18.5 J/TH)
- Whatsminer M63S 100% better weight (10,700.0 vs 28.0 kg)
- Whatsminer M63S 106% more heat output (11,942 vs 24,618 BTU/hr)
- Whatsminer M63S 100% more home mining score (22.0 vs 44.0)
Cost & ROI Over Time
Hardware cost is only half the story — here is how each miner's upfront price plays out against cumulative profit at a $0.10/kWh rate.
| MicroBT Whatsminer M10S | Metric | Whatsminer M63S |
|---|---|---|
| $3,800 | Upfront cost (MSRP) | $12,000 |
| -$6.42 | Daily net profit | -$3.31 |
| -$6,145 | Net after 1 year | -$13,207 |
| -$8,490 | Net after 2 years | -$14,415 |
| -$10,835 | Net after 3 years | -$15,622 |
| Does not pay back at current rates (negative daily profit) | Payback period | Does not pay back at current rates (negative daily profit) |
Projections assume continuous operation, a flat $0.10/kWh rate, and no hardware degradation, pool fees, or BTC price change. Real-world ROI varies.
Best For...
Best for Profitability
TieBoth miners produce similar daily profit.
Best for Home Mining
Whatsminer M63SScore: 44/100. 50 dB noise level.
Best for Efficiency
Whatsminer M63S18.5 J/TH — lower electricity cost per terahash.
Frequently Asked Questions
Is the MicroBT Whatsminer M10S or Whatsminer M63S more profitable?
At the current BTC price and a $0.10/kWh electricity rate, the Whatsminer M63S is more profitable at $-3.31/day compared to $-6.42/day for the MicroBT Whatsminer M10S. Profitability depends heavily on your electricity rate — use the selector above to calculate with your actual costs.
MicroBT Whatsminer M10S vs Whatsminer M63S: which runs at a lower noise level?
The Whatsminer M63S is quieter at 50 dB compared to the MicroBT Whatsminer M10S at 0 dB. For home mining, lower noise levels make a significant difference in livability.
For mining at home, should I pick the MicroBT Whatsminer M10S or the Whatsminer M63S?
The Whatsminer M63S scores 44/100 on our Home Mining Score (vs 22/100 for the MicroBT Whatsminer M10S). This composite score factors in noise, power requirements, heat output, size, and setup ease — all critical for residential mining.
How far apart are the MicroBT Whatsminer M10S and Whatsminer M63S on J/TH?
The MicroBT Whatsminer M10S runs at 63.6 J/TH while the Whatsminer M63S runs at 18.5 J/TH — a difference of 45.1 J/TH. Lower efficiency means less electricity per terahash of mining power, directly reducing operating costs. In relative terms that is 71% better efficiency (63.6 vs 18.5 J/TH).