ICERIVER ALPH AL3 specifications and service reference
ICERIVER AL3 official 15 TH/s ALPH matrix, exact electrical/manual boundary, and service routing.
Quick answer
The ICERIVER ALPH AL3 specifications and service reference is a Blake3 miner rated about 15 TH/s at roughly 3,500 W.
Full Specifications
| Model | ICERIVER ALPH AL3 specifications and service reference |
|---|---|
| Manufacturer | IceRiver |
| Algorithm | Blake3 |
| Hashrate | 15 TH/s |
| Power Consumption | 3,500 W |
| Efficiency | 233.3333 J/TH |
| Voltage Range | 200-250 V AC |
| Operating Temperature | 0-35 C |
| Dimensions | 430 x 195 x 290 mm |
| Weight | 15.5 kg |
| Status | Lifecycle not independently verified |
Manufacturer-supported specification
ICERIVER ALPH AL3
ICERIVER publishes AL3 as an ALPH miner rated 15 TH/s ±10% at 3500 W ±10%. The manufacturer product page and exact AL3 manual provide the operating and electrical boundaries below.
Exact operating lane
| Workload | Hashrate | Wall power |
|---|---|---|
| ALPH | 15 TH/s ±10% | 3500 W ±10% |
The manufacturer does not publish an efficiency field in the cited product row. Nominal arithmetic is approximately 233.33 J/TH; this is a derived check only and is not presented as an OEM efficiency specification.
Electrical and environment
The exact AL3 manual identifies the power interface as 200–250 V AC at 50–60 Hz. The product page lists Ethernet and 0–35°C operating temperature. The power cable is not included. Current, phase, plug, connector, conductor, breaker, and protection requirements are not published in the cited evidence; a qualified installer must derive the site design from the nameplate and local code.
Physical fields
Machine dimensions are 430 × 195 × 290 mm and net weight is 15.5 kg. Packaged dimensions are 560 × 314 × 382 mm and gross weight is 16.8 kg. Noise, humidity, fan count, chip count, board count, controller, and internal PSU details are not published here.
Manual, firmware, and service
The manufacturer provides an exact AL3 operation manual. Its tutorial page is the routing point for current manuals and firmware; select AL3 explicitly and never import an adjacent AL-series artifact.
Official AL3 manual · Official manuals and firmware selector · Official AL3 product page
Claim boundary
No acoustic, component, architecture, tuning, residential-use, heat-use, profitability, economics, parts-compatibility, or interchangeability claim is made.