ICERIVER ALPH AL2 Lite official specifications and firmware boundary
Exact AL2 Lite reference: 2 TH/s +/-5%, 500 W wall power +/-10%, calculated 250 J/TH, corrected physical data and model-specific beta firmware controls.
Quick answer
The ICERIVER ALPH AL2 Lite official specifications and firmware boundary is a Blake3 miner rated about 2 TH/s at roughly 500 W.
Full Specifications
| Model | ICERIVER ALPH AL2 Lite official specifications and firmware boundary |
|---|---|
| Model Number | ALPH AL2 LITE |
| Manufacturer | IceRiver |
| Algorithm | Blake3 |
| Hashrate | 2 TH/s |
| Power Consumption | 500 W |
| Efficiency | 250 J/TH |
| Dimensions | 205 x 110 x 202 mm |
| Weight | 4.02 |
| Status | Lifecycle not independently verified |
AL2 Lite authenticated profile
ICERIVER specifies 2 TH/s +/-5% and 500 W wall power +/-10%, calculating to 250 J/TH. The FAQ describes operation around 35 dB without a complete acoustic method, so noise is contextual rather than a comparison operand.
Electrical and physical contract
The integrated PSU accepts 100-240 V AC. The cable is not included; the manufacturer FAQ identifies the C13/C14 interface. Verify regional cord rating, plug, receptacle, circuit and protection. Unpackaged dimensions are 205 x 110 x 202 mm, packaged dimensions 298 x 208 x 304 mm, net mass 4.02 kg and gross mass 4.69 kg. Ethernet and 0-40 C operation are specified.
Firmware boundary
The official catalog lists ICERIVER-ALPH-AL2 LITE-20260621 as beta. Unzip the package, verify the published MD5, use only the exact AL2 Lite target, and follow the manufacturer’s reset/recovery guidance if behavior is abnormal. Do not update a normally operating device without a defined need and rollback path.