Bitmain Antminer L9 model 10 three-bin official reference
Official Antminer L9 model 10 Scrypt reference covering exact 15, 16 and 17 GH/s bins, single-phase 220–277 V requirements, cord/PSU boundaries, firmware and repair routing.
Quick answer
The Bitmain Antminer L9 model 10 three-bin official reference is a Scrypt miner rated about 15-17 GH/s at roughly 3,150 W.
Full Specifications
| Model | Bitmain Antminer L9 model 10 three-bin official reference |
|---|---|
| Model Number | Antminer L9 model 10 |
| Manufacturer | Bitmain |
| Algorithm | Scrypt |
| Hashrate | 15-17 GH/s |
| Power Consumption | 3,150-3,570 W |
| Noise Level | 75 dB |
| Cooling | Air |
| Voltage Range | Single-phase 220-277 V AC; 50-60 Hz; 20 A |
| Operating Temperature | -20 C to 45 C |
| Dimensions | 400 x 195 x 290 mm |
| Weight | 14.2 kg net |
| Interface | RJ45 Ethernet 10/100M |
| Status | OEM support reference |
Official three-bin reference: The Antminer L9 is a model-10 Scrypt miner. Its official manual publishes 15, 16, and 17 GH/s lanes using algorithm-appropriate GH/s and J/GH units.
| OEM lane | Typical hashrate | Typical wall power at 25°C | Typical wall efficiency at 25°C |
|---|---|---|---|
| L9-15G | 15 GH/s, ±3% actual fluctuation | 3,150 W, ±5% actual fluctuation | 210 J/GH, ±5% actual fluctuation |
| L9-16G | 16 GH/s, ±3% actual fluctuation | 3,360 W, ±5% actual fluctuation | 210 J/GH, ±5% actual fluctuation |
| L9-17G | 17 GH/s, ±3% actual fluctuation | 3,570 W, ±5% actual fluctuation | 210 J/GH, ±5% actual fluctuation |
The current web specification independently confirms the 16G lane and the stated tolerances. Efficiency is expressed as J/GH for Scrypt; it must not be relabeled J/TH or compared numerically with a different algorithm.
Electrical, cord, and PSU boundary
| Supply class | Single-phase AC |
|---|---|
| Input voltage | 220–277 V AC |
| Input frequency | 50–60 Hz |
| Maximum input current | 20 A |
| Listed PSU families | APW171215a/c or PW380a/b/c |
| Listed cord | C20-P13, included |
| Network | RJ45 Ethernet 10/100M |
This is high-power equipment requiring a qualified installation. Wrong input voltage can damage the server. Verify the exact miner, control-board, PSU, connector, and cord labels; circuit capacity; protection; disconnecting means; grounding; conductors; airflow; and local requirements before energizing it. A PSU or cord appearing in a manufacturer table does not make other revisions, connectors, or miners interchangeable.
Acoustic, physical, and environmental specification
| Sound level | 75 dBA at 25°C, specified with the fan at maximum RPM |
|---|---|
| Server dimensions | 400 × 195 × 290 mm |
| Packaged dimensions | 570 × 316 × 430 mm |
| Net / gross weight | 14.2 kg / 16.3 kg |
| Operating temperature | -20–45°C |
| Storage temperature | -40–70°C |
| Operating humidity | 10–90% RH, non-condensing |
| Operating altitude | Up to 2,000 m |
From 900 m to 2,000 m, reduce the highest operating temperature by 1°C for every 300 m increase in altitude.
Firmware, manual, and support routing
Match firmware to the exact L9 identity and installed control-board revision. Similar Scrypt models, enclosures, PSU families, connectors, or update workflows do not establish firmware or component compatibility.
- Photograph the miner, control-board, PSU, connector, and cord labels; record the serial, exact bin, board revision, and installed version.
- Select L9 in the manufacturer’s firmware selector and read the complete package description.
- Use the official L9 Manual v2.0.1 for the exact model-10 operating workflow.
- Use the manufacturer’s L9 support page for current manuals, setup, reset, upgrade, and troubleshooting routes.
- Stop if an image or procedure does not explicitly match the installed unit.
Repair and comparison
- For hardware faults, request model-specific ASIC miner repair diagnosis and provide all miner, board, and PSU labels.
- Compare L7 and L9 using exact Scrypt units and canonical specification lanes.
Known boundaries: no ASIC identity/count, fabrication process, shared-silicon assertion, generic tuning range, residential suitability, heat-reuse recommendation, profitability or other economics, price, lifecycle status, or cross-model firmware, controller, hashboard, PSU, cord, fan, or parts compatibility is asserted.
Primary sources: the official L9 web specification, L9 Manual v2.0.1, power-supply and cord record, L9 support page, and firmware selector linked above. Reviewed August 28, 2026.