Innosilicon A11 Pro ETC Miner 2000 MH/s
Exact OEM product lane with scoped tolerances and installation evidence.
Quick answer
The Innosilicon A11 Pro ETC Miner 2000 MH/s is a Etchash miner rated about 2000 MH/s at roughly 2,500 W.
Full Specifications
| Model | Innosilicon A11 Pro ETC Miner 2000 MH/s |
|---|---|
| Manufacturer | Innosilicon |
| Algorithm | Etchash |
| Hashrate | 2000 MH/s |
| Power Consumption | 2,500 W |
| Efficiency | 1.25 J/MH |
| Status | Exact OEM product reference |
Exact OEM product evidence
Innosilicon A11 Pro ETC Miner 2000 MH/s
The manufacturer’s exact product page documents the 8 GB A11 Pro ETC lane.
OEM matrix
| Hashrate | Power on wall | Derived efficiency | Memory |
|---|---|---|---|
| 2000 MH/s ±5% | 2500 W ±10% | 1.25 J/MH | 8 GB |
Power is measured by the OEM with a 93%-efficient PSU at 25°C. Efficiency is arithmetic from nominal values and is labeled derived.
Installation boundary
- AC voltage
- 210–240 V
- PSU AC input current
- 10 A
- Dimensions
- 375 × 146 × 292 mm
- Net weight
- 10.6 kg
- Network
- Ethernet
- Ambient
- 5–45°C
- Humidity
- <75%
The OEM says the customized PSU is included but the 220 V AC cable is not, and specifies a standard IEC C14 AC power cable. Frequency, phase, plug, conductor and upstream protection remain unresolved; a qualified installer must use the nameplate and local code.
Service
Do not import the separate 1500 MH/s record or another A-series firmware.
Exact OEM product page · OEM repair guidance · Repair · Fault finder