ICERIVER KS2 Lite: exact AC, cooling and firmware reference
Manufacturer-supported 2 TH/s +/-5%, 500 W +/-10% KAS miner with built-in PSU, direct 100-240 V AC input, and exact-model firmware boundaries.
Quick answer
The ICERIVER KS2 Lite: exact AC, cooling and firmware reference is a KHeavyHash miner rated about 2 TH/s at roughly 500 W.
Full Specifications
| Model | ICERIVER KS2 Lite: exact AC, cooling and firmware reference |
|---|---|
| Model Number | KAS KS2 LITE |
| Manufacturer | IceRiver |
| Algorithm | KHeavyHash |
| Hashrate | 2 TH/s |
| Power Consumption | 500 W |
| Efficiency | 250 J/TH |
| Voltage Range | 100-240 V AC, 50/60 Hz |
| Operating Temperature | 0-40 C |
| Dimensions | 205 x 110 x 202 mm |
| Weight | 4.02 |
| Status | Lifecycle not independently verified |
Exact KS2 Lite boundary
The manufacturer specifies 2 TH/s +/-5% and 500 W +/-10%. Nominal efficiency is 250 J/TH, calculated from those nominal operands.
Electrical and installation contract
The power supply is built in. The miner accepts 100-240 V AC at 50/60 Hz; the user supplies the C13/C14 power cord. Machine dimensions are 205 x 110 x 202 mm and net weight is 4.02 kg. Package dimensions are 298 x 208 x 304 mm with 4.69 kg gross weight. It uses Ethernet, operates at 0-40 C and below 90% relative humidity, and depends on unobstructed air convection.
The manufacturer describes this series as around 35 dB; this is approximate guidance, not an exact acoustic test scalar.
Firmware safety
The exact-model artifact ICERIVER-KAS-KS2 LITE-20241109 addresses hashboards dropping at low or normal temperature and other bugs. Match the model exactly, verify the asset, and never interrupt power during an upgrade.