ICERIVER KS1 evidence and service reference
ICERIVER KS1 evidence-limited reference: OEM launch identity, 1 TH/s at 600 W, exact-selector firmware and service boundaries.
Full Specifications
| Model | ICERIVER KS1 evidence and service reference |
|---|---|
| Model Number | KS1 |
| Manufacturer | IceRiver |
| Algorithm | KHeavyHash |
| Cooling | Air |
| Interface | Ethernet |
| Status | Evidence-limited OEM launch reference |
Evidence-limited ICERIVER KS1 reference: ICERIVER’s March 2023 launch notice identifies KS1 as a KAS miner rated at 1 TH/s and 600 W. This page publishes only durable exact-model facts and clearly scoped shared launch information.
| Model | KAS hashrate | Power | Arithmetic efficiency |
|---|---|---|---|
| ICERIVER KS1 | 1 TH/s | 600 W | 600 J/TH at nominal values |
Efficiency note: 600 J/TH is transparent arithmetic from 600 W ÷ 1 TH/s. The launch notice does not separately publish efficiency or tolerances, so this value is not a manufacturer efficiency specification.
Shared launch facts: scope carefully
The same ICERIVER sentence covers KS1 and KS2 together and states 14.9 kg gross weight, 12.5 kg net weight, and noise below 55 dB. It does not provide separate values for each model or a noise measurement protocol. These remain shared KS1/KS2 launch statements only. They are not normalized into KS1 structured product fields, and 14.9 kg must not be presented as net machine weight.
Installation evidence is unresolved
The durable primary source reviewed here does not publish KS1 dimensions, voltage, phase, frequency, current, circuit protection, PSU identity, cord, plug, connector, inlet count, operating or storage temperature, humidity, altitude, fan count, board count, chip count, controller, or silicon identity.
Do not energize from this page alone. A qualified person must inspect the exact unit nameplate and exact-model documentation before selecting a supply, branch circuit, protection, conductors, grounding, disconnect, receptacle, cord, or PSU. Prior unsourced supply and calculated PSU-sizing statements are withheld.
No cross-model imports
A similar name, shared announcement, shared firmware library, or adjacent selector entry does not establish matching firmware, enclosure, PSU, electrical limits, cooling, operating limits, control boards, or parts. Only an artifact explicitly identifying KS1 and matching the installed hardware revision may be used.
Firmware and support routing
- Open ICERIVER’s official firmware selector. Proceed only if the artifact explicitly identifies KS1 and matches the installed revision. If no exact KS1 lane is present, do not flash.
- Use ICERIVER’s tutorial library only where the workflow explicitly applies to KS1. Do not remove power during update or reboot.
- Review ICERIVER’s FAQ. Its warnings against unofficial firmware and cross-model control boards do not prove any exact KS1 image or part.
- General no-power workflow; apply only after exact-model confirmation.
- After-sales terms and out-of-warranty information
- Organize symptoms and logs; request local repair triage
Withheld claims: no physical, electrical, environmental, acoustic structured-product, architecture, component, release-date, price, economics, residential-use, heat-use, tuning, compatibility, interchangeability, or replacement-part claim is asserted beyond the scoped launch evidence. Primary record: ICERIVER launches KS1 and KS2. Reviewed August 28, 2026.