Goldshell MINI DOGE III PLUS two-mode specifications
Goldshell MINI DOGE III PLUS exact two-mode Scrypt matrix, device-input boundaries, temperature conflict, firmware non-import, and service routes.
Full Specifications
| Model | Goldshell MINI DOGE III PLUS two-mode specifications |
|---|---|
| Model Number | MINI DOGE III PLUS |
| Manufacturer | Goldshell |
| Algorithm | Scrypt |
| Noise Level | 35 dB |
| Voltage Range | 12 VDC device input |
| Status | Manufacturer-sourced two-mode specification |
Manufacturer-sourced two-mode specification
Goldshell MINI DOGE III PLUS
Goldshell publishes two operating rows for this Scrypt model and identifies LTC, DOGE, and BELLS.
OEM operating modes
| Mode | Hashrate | Power | Efficiency |
|---|---|---|---|
| Default | 810 MH/s ±5% | 500 W ±5% | 0.62 J/MH |
| Low Power | 620 MH/s ±5% | 300 W ±5% | 0.49 J/MH |
Hashrate and power retain separate OEM tolerances. Rows and endpoints are not mixed.
Device input and environment
- Device input
- 12 VDC
- OEM Power Cable label
- 10A
- Connection
- Dual-Mode; Wi-Fi supported
- Relative humidity
- ≤65%
- Fan
- 4500 rpm
The 10A value is only the OEM “Power Cable” label, not miner input current, facility current, breaker sizing, or continuous load. Facility mains, PSU AC input and architecture, frequency, phase, connector, protection, conductor sizing, and plug type remain unresolved. The marketing phrase “Integrate Power” does not establish a facility electrical boundary or override the 12 VDC table field.
Temperature conflict
The OEM table lists 0–35°C while usage precautions specify 10–35°C. This reference uses conservative 10–35°C guidance and discloses the lower table endpoint without recommending it.
Physical and acoustic facts
- Miner dimensions
- 133 × 163 × 202 mm
- Miner weight
- 3.7 kg
- Package dimensions
- 365 × 230 × 192 mm
- Package weight
- 4.45 kg
- Noise
- ≤35 dB
Firmware and model boundary
No exact MINI DOGE III PLUS firmware artifact is identified in the official roster reviewed. Never import or flash base MINI DOGE III firmware by name similarity. Base and PLUS are separate identities; their firmware, specifications, and parts are not interchangeable evidence.
Official product and support page · Request ASIC repair · Use the ASIC fault finder
Withheld fields
No release-price, profitability, home-use, heat, tuning, silicon, controller, board, parts compatibility, or unresolved facility-electrical claim is made.