ICERIVER RXD RX0 official specifications and PSU boundary
Exact RX0 reference: 260 GH/s +/-5%, 100 W wall power +/-10%, calculated 0.3846 J/GH, with separate bare-miner DC and optional-PSU AC contracts.
Quick answer
The ICERIVER RXD RX0 official specifications and PSU boundary is a Sha512256d miner rated about 260 GH/s at roughly 100 W.
Full Specifications
| Model | ICERIVER RXD RX0 official specifications and PSU boundary |
|---|---|
| Model Number | RXD RX0 |
| Manufacturer | IceRiver |
| Algorithm | Sha512256d |
| Hashrate | 260 GH/s |
| Power Consumption | 100 W |
| Efficiency | 0.3846154 J/GH |
| Dimensions | 200 x 194 x 74 mm |
| Weight | 2.5 |
| Status | Lifecycle not independently verified |
RX0 authenticated profile
ICERIVER specifies 260 GH/s +/-5% and 100 W wall power +/-10%. Nominal efficiency calculates to 0.3846 J/GH. The manufacturer FAQ describes operation around 35 dB, but publishes no complete acoustic test method, so noise is contextual and not a comparison operand.
Power architecture
The miner is sold without a PSU and accepts 19-20 V DC. An optional official 120 W supply accepts 100-240 V AC and outputs 19 V at 6.32 A through the documented C6 and 5.5 x 2.5 mm interfaces. The 100 W figure is already wall power; do not add an invented conversion-loss budget. Regional cord, plug, receptacle, circuit and protection remain site-specific.
Physical and firmware scope
Dimensions are 200 x 194 x 74 mm, net mass is 2.5 kg, Ethernet is supported and operating temperature is 0-40 C. No current authenticated RX0 firmware package was visible in the official catalog; use only an exact-model artifact when published and verify its checksum and recovery instructions.