MicroBT WhatsMiner M76
Manufacturer-sourced M76 specifications: 336-374 TH/s, 14.5 J/T, 5,200 W normal and 7,000 W high-performance immersion modes.
Quick answer
The MicroBT WhatsMiner M76 is a Bitcoin miner rated about 336-374 TH/s (about 14.5 J/TH).
Latest Generation Hardware
This is a newer generation of mining hardware using recent ASIC chip technology. Compare efficiency, hashrate, and power draw against older generations before choosing a deployment plan.
Lower J/TH means lower electricity cost per unit of hashrate. Compare efficiency alongside purchase cost, noise, voltage, firmware support, and current network difficulty.
Full Specifications
| Model | MicroBT WhatsMiner M76 |
|---|---|
| Model Number | WhatsMiner M76 |
| Manufacturer | MicroBT |
| Algorithm | SHA-256 |
| Coins Mined | Bitcoin (BTC) |
| Hashrate | 336-374 TH/s |
| Efficiency | 14.5 J/TH |
| Cooling | immersion |
| Voltage Range | AC 380-480 V |
| Operating Temperature | 25-55 C inlet normal; 25-45 C high-performance |
| Dimensions | 401 x 267.5 x 147 mm with handle |
| Weight | 18 kg net; 19 kg gross |
| Interface | Ethernet |
The current manufacturer manual defines the immersion-cooled WhatsMiner M76 family at 336-374 TH/s +/-10% and 14.5 J/T +/-5%. It publishes two discrete operating modes: 5,200 W +/-10% in normal mode and 7,000 W +/-10% in high-performance mode. These modes are not presented as one continuous power range.
Electrical and immersion requirements
The manual specifies AC 380-480 V input and a custom power connection rated at 16 A or higher. It does not state the phase or conductor arrangement. Confirm the exact unit nameplate and installation manual. The immersion loop requires at least 24 L/min flow +/-10% and S5X or S3X insulating coolant.
Normal-mode coolant inlet is 25-55 C; high-performance mode is 25-45 C, with +/-2 C control. Storage and transport temperature is -40 C to 70 C. Storage humidity is 5-95% and long-term storage 30-69%, non-condensing. The manual does not publish operating humidity, pressure, pH, coolant volume, or outlet temperature.
Physical and availability record
The manual lists 401 x 267.5 x 147 mm including the handle, 18 kg net, 19 kg gross, and Ethernet. It does not publish noise, a PSU model, ASIC details, control-board platform, or release date. No current main manufacturer-shop M76 listing was found during this review, so the former single-point derived-power record is not retained as a current SKU.
Firmware and recovery boundary
This model and cooling class do not identify its firmware or recovery media. Record the raw reported platform, complete displayed type, installed version, cooling class, and symptom first. If any record conflicts or is unavailable, do not select a package. Public M7x recovery scope is not established here; do not infer recovery media from a model name, reported family, or unified updater coverage.
- Confirm this miner’s platform before firmware or recovery.
- Only after a resolved, non-conflicting identification, review official firmware and recovery scope.
- For identity conflicts, no boot, repeated failure, or electrical, thermal, flow, or liquid concern, request WhatsMiner diagnosis.
Primary source: manufacturer M76 manual (December 2025), listed in the official manual catalog. Reviewed August 27, 2026.