Skip to content
Goldshell X5S official modes and specifications ASIC miner reference image
Lifecycle not independently verified Goldshell Scrypt

Goldshell X5S official modes and specifications

1360 MH/s nominal, 1850 W, 1.36 J/MH native OEM efficiency, complete mode matrix and exact 220 V evidence boundary.

Scrypt hashrate1,360 MH/s
OEM power1,850 W
Native efficiency1.36 J/MH

Quick answer

The Goldshell X5S official modes and specifications is a Scrypt miner rated about 1360 MH/s at roughly 1,850 W.

Full Specifications

Full technical specifications for this miner.
Model Goldshell X5S official modes and specifications
Model Number X5S
Manufacturer Goldshell
Algorithm Scrypt
Hashrate 1360 MH/s
Power Consumption 1,850 W
Efficiency 1.36 J/MH
Noise Level 80 dB
Voltage Range 220 V OEM input; exact single value, no range stated
Operating Temperature 0-35 C
Dimensions 415 x 125 x 160 mm
Weight 5.2 kg (PSU excluded)
Status Lifecycle not independently verified

Goldshell X5S official modes and installation boundary

The official previous-miners specification identifies X5S as a Scrypt/LTC miner with two documented modes. Values are normalized to native MH/s and J/MH units.

Official operating modes

Mode Hashrate Power OEM efficiency
Hashrate 1360 MH/s 1850 W 1.36 J/MH
Balance 1110 MH/s 1260 W 1.13 J/MH

The table shows no Low-Power mode and publishes no tolerance percentages; neither is invented here.

Physical and operating facts

Miner dimensions are 415 × 125 × 160 mm. Net weight is 5.2 kg without the PSU. Connection is Ethernet, temperature is 0–35°C, relative humidity is 95% or less, and the published noise ceiling is 80 dB or less.

Electrical and firmware boundary

The OEM image states only Input Voltage: 220 V. It does not state a range, phase, frequency, current, connector, cable rating, circuit, or PSU model. Verify the exact PSU and all facility requirements from nameplates and local code. No exact X5S firmware artifact was found in the official catalog; do not use X5 or X6S firmware.

Official previous-miners specification · Official firmware catalog

The exact OEM table identifies LTC. DOGE, home suitability, heat reuse, profitability, release, MSRP, facility circuit, and parts fitment are not asserted.