Skip to content
Goldshell X6S official modes and specifications ASIC miner reference image
Lifecycle not independently verified Goldshell Scrypt

Goldshell X6S official modes and specifications

1787 MH/s nominal, 2195 W, 1.23 J/MH native OEM efficiency, complete mode matrix and exact 220 V evidence boundary.

Scrypt hashrate1,787 MH/s
OEM power2,195 W
Native efficiency1.23 J/MH

Quick answer

The Goldshell X6S official modes and specifications is a Scrypt miner rated about 1787 MH/s at roughly 2,195 W.

Full Specifications

Full technical specifications for this miner.
Model Goldshell X6S official modes and specifications
Model Number X6S
Manufacturer Goldshell
Algorithm Scrypt
Hashrate 1787 MH/s
Power Consumption 2,195 W
Efficiency 1.23 J/MH
Noise Level 80 dB
Voltage Range 220 V OEM input; exact single value, no range stated
Operating Temperature 0-35 C
Dimensions 240 x 125 x 280 mm
Weight 5 kg miner
Status Lifecycle not independently verified

Goldshell X6S official modes and installation boundary

The official previous-miners specification identifies X6S as a Scrypt/LTC miner with three documented modes. Values are normalized to native MH/s and J/MH units.

Official operating modes

Mode Hashrate Power OEM efficiency
Hashrate 1787 MH/s 2195 W 1.23 J/MH
Balance 1616 MH/s 1774 W 1.1 J/MH
Low-Power 1410 MH/s 1367 W 0.97 J/MH

The source publishes no tolerance percentages; none are invented here.

Physical and operating facts

Miner dimensions are 240 × 125 × 280 mm and miner weight is 5 kg. The separately listed power unit measures 300 × 120 × 46 mm and weighs 1.5 kg. Connection is Ethernet, temperature is 0–35°C, relative humidity is 95% or less, and the published noise ceiling is 80 dB or less.

Electrical and firmware boundary

The OEM image states only Input Voltage: 220 V. It does not state a range, phase, frequency, current, connector, cable rating, circuit, or PSU model. Verify both unit nameplates and all facility requirements under local code. The exact official X6S firmware artifact is version 2.0.15; do not cross-flash X5 or X5S firmware.

Official previous-miners specification · Official firmware catalog

The exact OEM table identifies LTC. DOGE, home suitability, heat reuse, profitability, release, MSRP, facility circuit, and parts fitment are not asserted.