Antminer S19 XP+ Hyd. evidence-limited identity record
Evidence-limited Antminer S19 XP+ Hyd. identity record. The exact name and PSU association are OEM-confirmed; former 279/293 TH/s claims remain unverified and withdrawn.
Full Specifications
| Model | Antminer S19 XP+ Hyd. evidence-limited identity record |
|---|---|
| Model Number | Antminer S19 XP+ Hyd. (specification unresolved) |
| Manufacturer | Bitmain |
| Status | Evidence-limited identity |
Evidence-limited identity record: Bitmain’s current official power-supply reference confirms the exact product name Antminer S19 XP+ Hyd. and associates it with the APW111721c power supply and LP20 power cord. The official material reviewed does not establish the 279 or 293 TH/s ratings previously published on this site.
This page therefore confirms a name and a narrow PSU-reference boundary only. Former hashrate, wall-power, efficiency, noise, dimensions, weight, release, price, lifecycle, coolant, and performance claims have been withdrawn until a durable manufacturer specification or exact nameplate evidence can be cited.
Do not collapse similar XP hydro names
- S19 XP+ Hyd. is the exact name confirmed here.
- S19 XP Hyd. is a separately documented k0-10 product with its own official specification.
- S19e XP Hydro is another distinct printed name and must be resolved independently.
- Air-cooled S19 XP is not a cooling, PSU, firmware, or recovery substitute.
A plus sign, an “e,” a hashrate suffix, or “Hyd.” is part of the hardware identity. Do not normalize those characters away.
What evidence is still required
Before publishing a performance or installation specification, obtain the complete physical nameplate, exact OEM specification revision, PSU label, voltage and phase, controller marking, coolant connectors, and manufacturer support record. A reseller title, calculator entry, or matching chassis image is not enough.
Power-supply evidence is not a facility specification
The official PSU table’s APW111721c and LP20 association does not establish input voltage, phase, current, connector pinout, coolant chemistry, flow, pressure, inlet temperature, firmware compatibility, or recovery method. Use the physical labels and exact manufacturer documents before installation or service.
Firmware, recovery, and repair
The model name alone does not identify the control board, installed firmware branch, lock state, or recovery medium.
- Record the complete suffix, controller, PSU label, and installed version.
- Do not flash an S19 XP Hyd. package or another S19-family image into this identity by analogy.
- For no boot, unknown identity, coolant alarms, leakage, corrosion, package mismatch, interrupted writing, or electrical and thermal symptoms, request Antminer diagnosis.
Return to the full S19 owner’s hub.
Primary source: Bitmain power-supply and power-cord model reference. Reviewed August 27, 2026.