MicroBT WhatsMiner M50S
Manufacturer-sourced M50S specifications: 120-134 TH/s, 26 J/T and 3,120-3,484 W, with the current exact shop SKU documented separately.
Quick answer
The MicroBT WhatsMiner M50S is a Bitcoin miner rated about 120-134 TH/s at roughly 3,120 W (about 26 J/TH).
Full Specifications
| Model | MicroBT WhatsMiner M50S |
|---|---|
| Model Number | WhatsMiner M50S |
| Manufacturer | MicroBT |
| Algorithm | SHA-256 |
| Hashrate | 120-134 TH/s |
| Power Consumption | 3,120-3,484 W |
| Cooling | air |
| Voltage Range | AC 220-240 V |
| Operating Temperature | -5 C to 35 C |
| Dimensions | 430 x 155 x 226 mm |
| Weight | 11.5 kg net; 12.6 kg gross |
| Interface | Ethernet |
| Status | Lifecycle not independently verified |
The current manufacturer manual defines the air-cooled WhatsMiner M50S family at 120-134 TH/s +/-5%, 26 J/T +/-5% at 25 C, and 3,120-3,484 W wall power +/-10%. These canonical manual ranges replace the former derived single-point record.
The manual lists AC 220-240 V input, an IEC C19 connection rated at 16 A or higher, 350 CFM airflow, Ethernet, a -5 C to 35 C operating range, a 430 x 155 x 226 mm enclosure, 11.5 kg net weight, and 12.6 kg gross weight. Use the exact unit nameplate and local electrical code. The manual does not publish phase, noise, humidity, altitude, PSU model, chip details, control-board platform, release date, or MSRP.
Current official-shop SKU lane
Reviewed August 27, 2026: the manufacturer’s active shop SKU is 124 TH/s at 26 J/T and 3,224 W. This exact SKU sits within the manual family range but does not turn every point inside that range into a published SKU.
The shop displays 13.5 kg and P221B/P222B supply references, while the manual explicitly lists 11.5 kg net and 12.6 kg gross and does not name a supply model. Those shop fields remain attached to the dated SKU lane; confirm the nameplate and bill of materials.
Firmware and recovery boundary
This model and cooling class do not identify its firmware or recovery media. Record the raw reported platform, complete displayed type, installed version, cooling class, and symptom first. If any record conflicts or is unavailable, do not select a package.
- Confirm this miner’s platform before firmware or recovery.
- Only after a resolved, non-conflicting identification, review official firmware and recovery scope.
- For an unknown or conflicting identity, no boot, repeated failure, or electrical or thermal concern, request WhatsMiner diagnosis.
Primary sources: manufacturer M50S manual (October 2024), listed in the official manual catalog; and the current manufacturer-shop SKU. Reviewed August 27, 2026.