Skip to content

We're upgrading our operations to serve you better. Orders ship as usual from Laval, QC. Questions? Contact us

Bitcoin accepted at checkout  |  Ships from Laval, QC, Canada  |  Expert support since 2016

1325 Rue Bergar, Laval, QC support@d-central.tech 1-855-753-9997 Mon-Fri: 8:30 - 18:00

ASIC Miner Control Boards

The control board is the brain of every ASIC miner — managing hashboard communication, network connectivity, fan speed, and firmware execution. When a control board fails, the entire machine goes down. D-Central stocks replacement control boards for Bitmain Antminer and MicroBT Whatsminer series, including boards for the S9, S17, T17, S19, and Whatsminer M20/M30 families.

Common signs of a failing control board:

Miner powers on but shows no network activity (no IP on your router)
Hashboards not detected despite known-good hashboards and cables
Kernel log errors referencing the I/O controller or SPI communication
Red LED status indicators on the board itself
Firmware flashing fails repeatedly

Before replacing your control board, verify the issue is not a simple SD card corruption (Antminer S9/T9+) or a loose data ribbon cable. Our ASIC Repair team frequently sees boards sent in for replacement that only needed a cable reseat or firmware reflash.

All control boards are tested and verified functional before shipping. We pull from the same inventory our repair technicians use daily. Need installation guidance? Our support team can walk you through the swap — most control board replacements take under 15 minutes with basic tools.

Browse our full Mining Hardware Parts inventory for hashboards, PSUs, fans, and chips. Need a professional diagnosis? Book an ASIC repair and let our team handle it.

Showing all 12 resultsSorted by popularity

Show:244896

Shop Control boards from D-Central. 12 products available with checkout-confirmed shipping, support, and product terms.

Browse control boards with filters, sorting, and key product details first.

Bitcoin Accepted Shipping options confirmed at checkout Product warranty terms shown before purchase In-House Repair Experts Ships from Quebec

Bitcoin mining hardware, Bitaxe miners, ASIC parts, repair supplies, and space-heater builds from D-Central. 350+ products listed. Ships from Laval, Quebec. Bitcoin accepted.

The control board is the brain of every ASIC miner — managing hashboard communication, network connectivity, fan speed, and firmware execution. When a control board fails, the entire machine goes down. D-Central stocks replacement control boards for Bitmain Antminer and MicroBT Whatsminer series, including boards for the S9, S17, T17, S19, and Whatsminer M20/M30 families.

Common signs of a failing control board:

Miner powers on but shows no network activity (no IP on your router)
Hashboards not detected despite known-good hashboards and cables
Kernel log errors referencing the I/O controller or SPI communication
Red LED status indicators on the board itself
Firmware flashing fails repeatedly

Before replacing your control board, verify the issue is not a simple SD card corruption (Antminer S9/T9+) or a loose data ribbon cable. Our ASIC Repair team frequently sees boards sent in for replacement that only needed a cable reseat or firmware reflash.

All control boards are tested and verified functional before shipping. We pull from the same inventory our repair technicians use daily. Need installation guidance? Our support team can walk you through the swap — most control board replacements take under 15 minutes with basic tools.

Browse our full Mining Hardware Parts inventory for hashboards, PSUs, fans, and chips. Need a professional diagnosis? Book an ASIC repair and let our team handle it.

Hardware buying guide

Compare power, noise, heat, condition, and support before choosing a miner, heater, or replacement part.

Find parts by failure

Move from the failure symptom to the right replacement category before browsing the full parts catalog.

Products to compare

Shortcuts to active products, compatible parts, and model-specific items that buyers should compare before ordering.