Bitmain Antminer S19j Pro+ multi-bin reference
Official j1-12 Antminer S19j Pro+ reference covering 109, 113, 117 and 120 TH/s bins, 2,998-3,300 W and 27.5 J/TH.
Quick answer
The Bitmain Antminer S19j Pro+ multi-bin reference is a Bitcoin miner rated about 109-120 TH/s at roughly 2,998 W (about 27.5 J/TH).
Full Specifications
| Model | Bitmain Antminer S19j Pro+ multi-bin reference |
|---|---|
| Model Number | Antminer S19j Pro+ j1-12 |
| Manufacturer | Bitmain |
| Algorithm | SHA-256 |
| Hashrate | 109-120 TH/s |
| Power Consumption | 2,998-3,300 W |
| Cooling | air |
| Voltage Range | 200-240 V AC; 47-63 Hz |
| Operating Temperature | 0 C to 40 C |
| Dimensions | 400 x 195 x 290 mm including PSU |
| Weight | 13.70 kg net including PSU |
| Interface | RJ45 Ethernet 10/100M |
| Status | OEM support reference |
Official multi-bin reference: Bitmain’s S19j Pro+ specification identifies model j1-12 in four nominal bins: 109, 113, 117, and 120 TH/s. Corresponding wall power at 25°C is 2,998, 3,108, 3,218, and 3,300 W, with 27.5 J/TH ±5%. The OEM page prints +3% for hashrate, so this reference does not silently convert it into a symmetric tolerance.
This resolves the former 117T record conflict: the official 117T lane is 3,218 W, not 3,355 W, and it is one of four exact bins rather than a universal model value.
Common specifications are 200–240 V AC, 47–63 Hz, 20 A maximum-condition input split across two 10 A inputs, RJ45 Ethernet 10/100M, a 400 × 195 × 290 mm server including PSU, 13.70 kg net weight, 0–40°C operation, −20–70°C storage, 10–90% non-condensing RH, and altitude up to 2,000 m with temperature derating above 900 m.
Unknown or revision-dependent: the source does not publish a sound-pressure rating, exact ASIC identity/count, or tuning envelope. Current price, stock, condition, warranty, and the sold hashrate bin belong to an exact product listing.
Electrical and airflow gate
Air-cooled industrial hardware. Confirm the exact bin, nameplate, inlet, current, conductor and connector ratings, protection, airflow path, ambient limits, and local electrical requirements before installation.
Firmware and recovery
An S19j Pro+ label or AML category does not prove a recovery medium, lock state, or cross-flash path.
- Identify the exact suffix, cooling class, control board, and installed version.
- Only after every identifier matches, consult the exact manufacturer firmware entry and board-scoped recovery boundary.
- For no boot, missing or conflicting identity, package mismatch, failed writing, or electrical, thermal, or physical symptoms, request Antminer diagnosis.
Exact purchase configuration
View the separate S19j Pro+ product listing. Confirm its exact bin, condition, PSU, warranty, and stock state on the listing.
Primary sources: Bitmain S19j Pro+ specification matrix and official support hub. Reviewed August 27, 2026.