Antminer AL1 family owner hub: Standard and Pro
Antminer AL1 family authority hub: Bitmain publishes Standard and Pro as distinct submodels of AL1 version 10. Keep their canonical profiles separate while using the same Blake3-native units and shared installation evidence.
| Canonical | Typical Blake3 hashrate | Typical wall power at 25°C | Typical wall efficiency at 25°C |
|---|---|---|---|
| AL1 Standard | 15.6 TH/s | 3,510 W | 225 J/TH |
| AL1 Pro | 16.6 TH/s | 3,730 W | 225 J/TH |
Actual hashrate fluctuates ±3% and wall efficiency ±5%. Bitmain calls power typical without publishing a separate power tolerance. TH/s and J/TH here describe Blake3 work only; do not use them for cross-algorithm comparisons.
Shared electrical preflight
Both exact source rows use one 220–277 V AC, 50–60 Hz, 20 A input. Bitmain’s roster identifies APW171215a/c or PW380a/b/c and an included C20-P13 cord. Wrong voltage can damage the server. A qualified person should verify the exact labels, input, cord, connector, circuit, protection, conductors, disconnect, grounding, ventilation, and applicable requirements.
Official-source conflicts
The current web specification lists net weight 16.5 kg, operating temperature -20–40°C, and storage temperature -40–70°C. The official manual lists net weight 18.2 kg, operating temperature -20–45°C, and storage temperature -20–70°C. The canonical pages therefore withhold one normalized net weight and storage lower endpoint, and use the safer web operating ceiling of 40°C. Both sources agree on 430 × 195 × 290 mm miner dimensions, 570 × 316 × 430 mm packaged dimensions, 18.2 kg gross weight, 10–90% RH non-condensing, and altitude up to 2,000 m.
Exact-model resources
- Bitmain AL1 Standard/Pro specification.
- Bitmain AL1 support hub and manual route.
- Select AL1 and the exact installed revision in Bitmain’s firmware selector.
- Use Bitmain’s miner failure diagnostic guide, then organize symptoms and logs or request repair diagnosis.
No redirect joins Standard and Pro. No compatibility, tuning, economics, residential suitability, heat-use, or undocumented hardware claim is implied.
Related products, repair, and setup paths
- how D-Central diagnoses ASIC repairs
- ASIC troubleshooting library
- ASIC manuals and repair guides
- replacement hashboards
- ASIC control boards
- ASIC power supplies
- S19 family replacement hashboard
- C52 replacement control board
- APW12 S19 power supply
- compare specs in the ASIC miner database
- compare ASIC miner specs
- ASIC miner database
- ASIC repair services
- Antminer S19 specs and profitability
- buy a tested Antminer S19
- Antminer S19 maintenance guide
- Antminer S19 repair service
- Antminer S21 specs
- Bitmain Antminer S21
- Antminer S21 maintenance guide
- BM1370BC S21 Pro chip
- Antminer S9 specs
- Bitmain Antminer S9
- Antminer S9 maintenance guide
- S9 hashboard repair parts bundle
Last reviewed August 27, 2026.
