Antminer D3 and D5 X11 evidence hub
Antminer D3/D5 family hub: both models use X11/DASH, but their power architectures and evidence boundaries differ. They are not interchangeable.
| Canonical | OEM matrix | Electrical boundary |
|---|---|---|
| D3 | 19.3 GH/s / 1,158 W and 17.0 GH/s / 970 W; efficiency conflicted | 11.6–13 V DC, ten PCIe, external APW3/APW5/APW7 |
| D5 | 119 GH/s ±5%; 1,566 W ±7%; 13.16 J/GH ±7% | PSU-attached all-in-one, APW8; facility mains unresolved |
D3’s printed 0.1 J/GH field conflicts with approximately 60 and 57.06 J/GH arithmetic, so normalized D3 efficiency is withheld. Do not apply D3 DC connectors or PSU choices to D5, and do not infer D5 facility mains from another APW8 miner.
No compatibility, economics, home, heat-use, tuning, or cross-algorithm claim is implied.
Related products, repair, and setup paths
- how D-Central diagnoses ASIC repairs
- ASIC troubleshooting library
- ASIC manuals and repair guides
- replacement hashboards
- ASIC control boards
- ASIC power supplies
- S19 family replacement hashboard
- C52 replacement control board
- APW12 S19 power supply
- compare specs in the ASIC miner database
- compare ASIC miner specs
- ASIC miner database
- ASIC repair services
- Antminer S19 specs and profitability
- buy a tested Antminer S19
- Antminer S19 maintenance guide
- Antminer S19 repair service
- Antminer S21 specs
- Bitmain Antminer S21
- Antminer S21 maintenance guide
- BM1370BC S21 Pro chip
- Antminer S9 specs
- Bitmain Antminer S9
- Antminer S9 maintenance guide
- S9 hashboard repair parts bundle
Last reviewed August 27, 2026.