Antminer E3 evidence and service router
Antminer E3 evidence and service router: There is one manufacturer-supported E3 specification, not separate 180 MH/s and 190 MH/s model generations.
Canonical reference
Open the canonical Antminer E3 profile: 191 MH/s, 800 W ±10%, and 4.4 J/MH ±10% on Ethash. Bitmain associates E3 with ETC and CLO.
Power preflight
The miner accepts 11.6–13.0 V DC over seven PCIe connectors. Bitmain lists APW3-series, APW5, and APW7 support. This does not establish facility mains. Verify the exact PSU revision and nameplate and have a qualified person confirm the upstream installation.
Exact evidence and service routes
- E3 specification
- E3 support
- Bitmain firmware selector
- EOS list: E3 June 9, 2020
- ASIC Fault Finder
- ASIC repair intake
No compatibility between E3 and another miner, PSU revision, board, or firmware image is implied.
Related products, repair, and setup paths
- how D-Central diagnoses ASIC repairs
- ASIC troubleshooting library
- ASIC manuals and repair guides
- replacement hashboards
- ASIC control boards
- ASIC power supplies
- S19 family replacement hashboard
- C52 replacement control board
- APW12 S19 power supply
- compare specs in the ASIC miner database
- compare ASIC miner specs
- ASIC miner database
- ASIC repair services
- Antminer S19 specs and profitability
- buy a tested Antminer S19
- Antminer S19 maintenance guide
- Antminer S19 repair service
- Antminer S21 specs
- Bitmain Antminer S21
- Antminer S21 maintenance guide
- BM1370BC S21 Pro chip
- Antminer S9 specs
- Bitmain Antminer S9
- Antminer S9 maintenance guide
- S9 hashboard repair parts bundle
Last reviewed August 27, 2026.