Antminer S15 and T15 evidence and service hub

Antminer S15/T15 evidence and service hub: S15 and T15 are distinct SHA-256 models. Their normal and low-power ranges, board counts, physical dimensions, and firmware must remain model-specific.

Model	Normal lane	Low-power ranges	Canonical
S15	27 TH/s ±2%; 1,539 W ±7%; 57 J/TH	16–18 TH/s, each endpoint ±2%; 800–900 W, each endpoint ±7%; 50 J/TH	S15 reference
T15	23 TH/s ±2%; 1,541 W ±7%; 67 J/TH	19–20.5 TH/s, each endpoint ±2%; 1,140–1,230 W, each endpoint ±7%; 60 J/TH	T15 reference

Range endpoints are not represented as paired presets.

APW8 preflight

Both models use an attached APW8 and two miner-side PCIe connectors. The S15/T15 APW8 output is 16.32–20.04 V. APW8 revisions for other miners use different output ranges. Match the exact PSU label and revision; do not infer compatibility from the APW8 name.

Facility AC voltage, current, frequency, cord, and connector remain unresolved in these model sources. A qualified person must verify every upstream requirement from the exact PSU nameplate.

Official evidence and service

• S15 specification
• T15 specification
• Bitmain firmware selector
• APW8 revision identification
• APW8 removal
• Control-board removal
• Exact-model test-jig setup
• ASIC Fault Finder; repair intake

No S15/T15 firmware, APW8 revision, control board, hashboard, or part compatibility is implied.