Description
The Bitmain APW3++ PSU is a robust and high-efficiency power supply unit designed specifically for Antminer devices. Capable of delivering a stable output DC voltage across selectable ranges from 12.0V to 13.5V, it is an adaptable choice for various mining setups.
With a rated power of 1600W (on 200-240V) and 1200W (on 110-120V), the APW3++ PSU supports the high-performance demands of your Antminer. This unit is compatible with both 110-120V and 220-240V power sources, providing versatility for different electrical environments.
A configuration for Solo Miners : NerdQaxe+, NerdQaxe++, and Bitaxe GT Gamma Turbo is also available.
Apw3 Psu
The Apw3 PSU delivers reliable power for your mining hardware.
- High Efficiency and Reliability: The APW3++ PSU boasts high efficiency, minimizing power wastage and reducing electricity costs. Its reliability ensures continuous operation, essential for mining environments.
- Protection Features: Equipped with low-voltage input protection, output short circuit protection, and overheat protection, the APW3++ PSU safeguards your mining operations, ensuring both power and safety.
- Versatility and Modifiability: One of the standout features is its ability to be modified for use with single hashboard miners such as the Antminer S19 Slim. This adaptability allows you to upgrade your mining hardware without needing to purchase a new power supply unit, saving costs and enhancing sustainability.
- Cooling Mechanism: The PSU includes a forced-air cooling fan to prevent overheating during extended mining sessions, ensuring stable and reliable performance.
Ideal for All Mining Setups
Whether you are just starting in the mining industry or looking to upgrade your existing setup, the Bitmain APW3++ PSU is a reliable, high-performance power supply unit that meets your needs.
Don’t compromise on power or safety—choose the APW3++ PSU for your Antminer today.
Power Supply Upgrade For NerdQaxe++ Overclocking
We also offer an APW3++ version compatible with the NerdQaxe+, NerdQaxe++ and Bitaxe GT Gamma Turbo. With this version, you can power multiple solo miners using a single PSU.
This configuration includes:
-
A refurbished APW3++, set to 12.5 V
-
A silent fan, making the PSU virtually inaudible
-
2x XT30 female to DC 12V power cables – 5.5 × 2.1 mm / 5.5 × 2.5 mm female connectors
-
2x PCIe 6-pin female to DC 12V power cables, right-angle 5.5 × 2.1 mm / 5.5 × 2.5 mm male connectors
Additional Information
Configuration: Available in both Industrial (Stock) and Loki (Modded) configurations.
- Industrial (Stock): The stock version outputs 12V with the standard 6PIN connectors, suitable for most industrial mining setups.
- Loki (Modded): The modded version replaces the 6PIN connectors with heavy-duty battery connectors. BE EXTREMELY CAREFUL MANIPULATING THESE CABLES. NEVER MANIPULATE IN OPERATION. This version allows for voltage selection and is ideal for those who want to build their own Loki rigs without the hassle of modding their PSU. D-Central has you covered with pre-modded units.
IMPORTANT NOTE – LOKI APW3 COMPATIBILITY: The Loki APW3 only works on BraiinsOS with the Loki Lite and above 12.8V. For higher-voltage operation, compatibility depends on the firmware configuration and miner setup.
IMPORTANT NOTE – BRAIINSOS 26.01: The most recent version of Braiins OS (26.01) includes a new feature that can disable the voltage check. Proceed at your own risk. Disabling this protection can damage hardware if used improperly.
Output Voltage Options: 12.0V, 12.1V, 12.2V, 12.3V, 12.4V, 12.5V, 12.6V, 12.7V, 12.8V, 12.9V, 13.0V, 13.1V, 13.2V, 13.3V, 13.4V, 13.5V.
Compatibility Note for S19 and Above: Compatibility for Antminer S19 and newer models depends on the specific control board, firmware, and wiring/modification method used. Please verify your exact setup before operation, especially when using modded or high-voltage Loki configurations.
Remember, the APW3++ PSU is more than just a power supply unit. It’s an investment in the safety and efficiency of your mining operations. So why wait? Power up your Antminer with the Bitmain APW3++ PSU today.
Please ensure your mining farm uses proper cooling, dust filters, and AC 10A cables to meet the required operating conditions: Humidity <75%, AC voltage 210 ~ 240V, power supply AC input current 10A, dust <0.5 Mg/m³.
This material is reconditioned by D-Central. It will ship based on first paid, first shipped orders for which D-Central has received full payment. We recommend that you know your local customs clearance policies and prepare for them in advance to avoid any customs clearance delays or unforeseen costs.
We offer a 7-day DOA warranty on the purchase of all our refurbished replacement parts. In addition, our guarantee provides you with the free repair of your dashboard within a priority period to minimize mining downtime.
Shipping charges, customs fees, and taxes are not included in the retail price shown above.
NOTE: The price of cryptocurrency mining materials should be adjusted frequently based on variables such as the exchange rate of Bitcoin, the difficulty of Bitcoin, or the expected increase in difficulty. Refund requests based on price changes will NOT be honored.
By making a purchase from this website, you agree to the above points and our return and refund policy.
Reviews
There are no reviews yet.